FCGear GearConnector/fr: Difference between revisions

From FreeCAD Documentation
(Created page with "==Utilisation==")
(Created page with "# Passez à l'16px atelier FCGear. # Sélectionnez deux éléments de dents compatibles (Voir Notes) : #...")
Line 25: Line 25:
==Utilisation==
==Utilisation==


# Switch to the [[Image:FCGear_workbench_icon.svg|16px]] [[FCGear_Workbench|FCGear Workbench]].
# Passez à l'[[Image:FCGear_workbench_icon.svg|16px]] [[FCGear_Workbench/fr|atelier FCGear]].
# Select two elements of matching teeth (See [[#Notes|Notes]]):
# Sélectionnez deux éléments de dents compatibles (Voir [[#Notes|Notes]]) :
#* The first must be a spur gear or an internal gear.
#* Le premier doit être un engrenage droit ou un engrenage interne.
#* The second can be a spur gear, or a rack
#* Le second peut être un engrenage droit, ou une crémaillère.
#* Il y a plusieurs façons de lancer la commande :
# There are several ways to invoke the command:
#* Press the {{Button|[[File:FCGear_GearConnector.svg|16px]] [[FCGear_GearConnector|Combine two gears]]}} button in the toolbar.
#* Appuyez sur le bouton {{Button|[[File:FCGear_GearConnector.svg|16px]] [[FCGear_GearConnector/fr|Combine two gears]]}} bouton dans la barre d'outils.
#* Select the {{MenuCommand|Gear → [[File:FCGear_GearConnector.svg|16px]] Combine two gears}} option from the menu.
#* Sélectionnez l'option {{MenuCommand|Gear → [[File:FCGear_GearConnector.svg|16px]] Combine two gears}} dans le menu.
# Change the gear parameter to the required conditions (see {{Emphasis|PropertiesData}} below).
# Modifiez le paramètre de l'engrenage en fonction des conditions requises (voir {{Emphasis|PropriétésDonnées}} ci-dessous).


==Properties==
==Properties==

Revision as of 20:21, 27 September 2022

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Other languages:

FCGear GearConnector

Menu location
Gear → Combine two gears
Workbenches
FCGear
Default shortcut
Aucun
Introduced in version
1.0
See also
None

Description

Utilisation

  1. Passez à l' atelier FCGear.
  2. Sélectionnez deux éléments de dents compatibles (Voir Notes) :
    • Le premier doit être un engrenage droit ou un engrenage interne.
    • Le second peut être un engrenage droit, ou une crémaillère.
    • Il y a plusieurs façons de lancer la commande :
    • Appuyez sur le bouton Combine two gears bouton dans la barre d'outils.
    • Sélectionnez l'option Gear → Combine two gears dans le menu.
  3. Modifiez le paramètre de l'engrenage en fonction des conditions requises (voir Propriétés → Données ci-dessous).

Properties

Notes

The selection order determines whether the second element can roll around the first element when the property Donnéesangle1 is changed.

Scripting