Draft EinrastenOrtho

From FreeCAD Documentation
Revision as of 13:02, 5 October 2020 by Maker (talk | contribs) (Created page with "Diese Methode fängt an einem Punkt auf einer imaginären Linie, die vom vorherigen Punkt ausgeht und sich in bestimmten Schritten von 45° unendlich weit erstreckt; dazu geh...")

Entwurf Ortho

Menüeintrag
Entwurf → Fang → Ortho
Arbeitsbereich
Entwurf, Arch
Standardtastenkürzel
Keiner
Eingeführt in Version
-
Siehe auch
Entwurf Fang, Entwurf UmschaltenFang

Beschreibung

Diese Methode fängt an einem Punkt auf einer imaginären Linie, die vom vorherigen Punkt ausgeht und sich in bestimmten Schritten von 45° unendlich weit erstreckt; dazu gehören 0°, 90°, 135°, 180°, 225°, 270° und andere ganzzahlige Vielfache.

File:Draft Snap Ortho.png

Snapping the second point of a line to a point that makes an angle of 135° with the horizontal; small circles indicate all possible snapping directions

Anwendung

  1. Make sure File:Snap Lock.svg Draft ToggleSnap and File:Snap Ortho.svg Snap Ortho are turned on.
  2. Choose a Draft tool to draw a shape.
  3. Move the cursor approximately in the direction of a line that makes an angle of 45° with the horizontal.
  4. The snap symbol will appear when the tentative line makes an angle of 45°, or a multiple of it.
  5. Click to attach your new point.

Note: the snapping only works on the current working plane.