This page is a translated version of the page Draft Snap Near and the translation is 36% complete.
Outdated translations are marked like this.

Draft Snap Near

Menu location
Snapping → Snap Near
Workbenches
Draft, BIM
Default shortcut
None
Introduced in version
-
See also
Draft Snap, Draft Snap Lock

Descrição

The   Draft Snap Near option snaps to the nearest point on faces and edges. The faces and edges can belong to Draft or BIM objects but also to objects created with other workbenches.

 

Snapping the second point of a line to the nearest point on an edge

Utilização

For general information about snapping see Draft Snap.

  1. Make sure snapping is enabled. See   Draft Snap Lock.
  2. If Draft Snap Near is not active do one of the following:
    • Press the   Snap Near button in the Draft Snap toolbar.
    • Draft: Hold down the    button in the Draft Snap Widget and in the menu that opens select the   Snap Near option.
    • BIM: Select the Snapping →   Snap Near option from the menu, or from the 3D View context menu.
  3. Choose a Draft or BIM command to create your geometry.
  4. Note that you can also change snap options while a command is active.
  5. Move the cursor over a face or edge.
  6. The face or edge is highlighted.
  7. If a nearest point is found the point is marked.
  8. Optionally move the cursor along the face or edge to select a different nearest point.
  9. Click to confirm the point.

Notas

  • 1.0 and below: It is not a good idea to have Draft Snap Near permanently active as it takes precedence over many other snap options.
  • introduced in 1.1: Is is possible to have Draft Snap Near permanently active, but it does mean you have to move the mouse more, and point the mouse more accurately, for other on-object snaps.

Preferências

See Draft Snap.


    Especial
  Orto