This page is a translated version of the page Draft Snap Endpoint and the translation is 33% complete.
Outdated translations are marked like this.

Draft Snap Endpoint

Menu location
Snapping → Snap Endpoint
Workbenches
Draft, BIM
Default shortcut
None
Introduced in version
-
See also
Draft Snap, Draft Snap Lock

Descrição

The   Draft Snap Endpoint option snaps to the endpoints of edges. The edges can belong to Draft or BIM objects but also to objects created with other workbenches.

 

Snapping the second point of a line to the endpoint of an edge

Utilização

For general information about snapping see Draft Snap.

  1. Make sure snapping is enabled. See   Draft Snap Lock.
  2. If Draft Snap Endpoint is not active do one of the following:
    • Press the   Snap Endpoint button in the Draft Snap toolbar.
    • Draft: Hold down the    button in the Draft Snap Widget and in the menu that opens select the   Snap Endpoint option.
    • BIM: Select the Snapping →   Snap Endpoint option from the menu, or from the 3D View context menu.
  3. Choose a Draft or BIM command to create your geometry.
  4. Note that you can also change snap options while a command is active.
  5. Move the cursor over an edge.
  6. The edge is highlighted.
  7. If an endpoint is found the point is marked and the   icon is displayed near the cursor.
  8. Optionally move the cursor closer to the other endpoint to select that point instead.
  9. Click to confirm the point.

Preferências

See Draft Snap.