Draft Snap Angle/de: Difference between revisions

From FreeCAD Documentation
(Created page with "{{docnav/de |Senkrecht |Mittelpunkt |Draft Snap |IconL=Draft Perpendicular.png |IconC=Workbench_Draft.svg |Ico...")
(Created page with "{{docnav/de |Senkrecht |Mittelpunkt |Draft Snap |IconL=Draft Perpendicular.png |IconC=Workbench_Draft.svg |Ico...")
Line 30: Line 30:
# Click to attach your new point.
# Click to attach your new point.


{{docnav/de
{{docnav|[[Draft Perpendicular|Perpendicular]]|[[Draft Center|Center]]|[[Draft_Snap|Draft Snap]]|IconL=Draft Perpendicular.png|IconC=Workbench_Draft.svg|IconR=Draft Center.png}}
|[[Draft Perpendicular/de|Senkrecht]]
|[[Draft Center/de|Mittelpunkt]]
|[[Draft_Snap/de|Draft Snap]]
|IconL=Draft Perpendicular.png
|IconC=Workbench_Draft.svg
|IconR=Draft Center.png
}}


{{Draft Tools navi/de}}
{{Draft Tools navi/de}}

Revision as of 13:41, 17 February 2019

Draft Angle

Menüeintrag
Entwurf → Objektfang → Winkel
Arbeitsbereich
Draft, Arch
Standardtastenkürzel
Keiner
Eingeführt in Version
-
Siehe auch
Objektfang, Objektfang umschalten

Description

This method snaps to the points of circles and arcs at specific increments of 30° and 45° on the arc; this includes 0°, 60°, 90°, 180°, 210°, 270°, and other integer multiples.

File:Draft Snap Angle.png

Snapping the second point of a line to the circle, at the 45° angle on the arc; small circles indicate all possible snapping locations

How to use

  1. Make sure File:Snap Lock.svg Draft ToggleSnap and File:Snap Angle.svg Snap Angle are turned on.
  2. Choose a Draft tool to draw a shape.
  3. Move the cursor over a circle or arc object.
  4. The circle or arc will be highlighted in yellow, and a small white circle will indicate the point on the arc to which your new point will be attached; this point will make an angle with the horizontal of 30° or 45°, or a multiple of those.
  5. Move the cursor to a different position on the circle to choose a different attachment point.
  6. Click to attach your new point.