Design456 Workbench

From FreeCAD Documentation
Revision as of 20:02, 10 March 2021 by Marja1 (talk | contribs)
This workbench is under heavy development

Introduction

Design456 External workbench icon

The Design456 workbench is an External workbench that plans to implement a Direct Modeling methodology in FreeCAD. Think 'push and pull geometry' that one finds in CAD suites like SketchUp and Fusion360.

Background

Traditionally, FreeCAD employs a Parametric Modeling methodology which is a powerful and scalable approach. It is also has been an industry standard.

Installation

Download the Design456 workbench via the Addon Manager Tools → Addon Manager

References

Tools

2D Drawing and manipulation tools

  • Design456 Arc3Points: Use this tool to create an Arc. The points you choose or select could be from other shapes for example a cube, or they could be just points you put on any plane (delete them later). You can combine several planes to get a curve crossing several planes. This tool is useful if you want to use it with surface tool to create a new surface. Any three points should be sufficient to create the arc. Combining two arcs could be used to make a circle also.
  • File:MultiPointsToWireClosed.svg MultiPointsToWireClose: Use this tool to create a series of lines between points selected in series. The order of selection will decide how the lines are arranged. The lines then will be closed and a surface will be created.
  • MultiPointsToWireOpen: Use this tool to create a series of lines between points selected in series. The order of selection will decide how the lines are arranged. The lines then will be open, but no surface is created.

3D Drawing and manipulation tools

Alignment tools

Template:Design456 Tools navi