Basic Sketcher Tutorial/fr: Difference between revisions

From FreeCAD Documentation
(Created page with "# Sélectionner 32px Mode construction # Sélectionner 32px Ske...")
(Created page with "==== Géométrie de l'esquisse ===== La géométrie de l'esquisse est utilisée pour créer les profils fermés requis pour effectuer des opérations 3D dans le plan de travai...")
Line 43: Line 43:
# Pour quitter le mode construction, cliquer à nouveau sur [[Image: Sketcher_ToggleConstruction.png | 32px]] [[Sketcher_ToggleConstruction | Mode construction]]
# Pour quitter le mode construction, cliquer à nouveau sur [[Image: Sketcher_ToggleConstruction.png | 32px]] [[Sketcher_ToggleConstruction | Mode construction]]


===== Sketcher geometry =====
==== Géométrie de l'esquisse =====
La géométrie de l'esquisse est utilisée pour créer les profils fermés requis pour effectuer des opérations 3D dans le plan de travail '' 'PartDesign' ''.
Sketcher geometry is used to create the closed profiles required to perform 3D operations in the '''PartDesign''' workbench.
# Select [[Image:Sketcher_Circle.png|32px]] [[Sketcher_Circle|Circle]]
# Sélectionner [[Image: Sketcher_Circle.png | 32px]] [[Sketcher_Circle | Circle]]
# Positionner son '' 'point central' '' sur l'origine de l'esquisse.
# Position its '''centerpoint''' on the origin of the sketch.
# Étendre la circonférence à une longueur arbitraire.
# Extend the circumference to an arbitrary length.





Revision as of 16:12, 18 February 2018

Tutoriel
Thème
Sketcher
Niveau
Beginner
Temps d'exécution estimé
10 minutes
Auteurs
Drei
Version de FreeCAD
0.16 or above
Fichiers exemples
Voir aussi
None

Ce tutoriel est destiné à présenter au lecteur le workflow de base du Sketcher Workbench. Nous allons créer un croquis similaire à celui montré ci-dessous.

L'atelier Sketcher existe en tant que module autonome, mais il est également accessible depuis PartDesign Workbench lorsqu'il est nécessaire de créer un 'profil' .


Requis

  • FreeCAD version 0.16 ou après

Procédure

Création d'une esquisse

  1. Créer un nouveau document
  2. Passer à Sketcher Workbench en utilisant le menu déroulant 'ou en cliquant sur' Menu Affichage> Workbench> Esquisse '.
  3. Sélectionner Nouvelle esquisse
  4. Nous devrions voir une boîte de dialogue qui nous invite à choisir l'orientation de l'esquisse et à fournir un décalage. Nous n'utiliserons pas offset, et nous utiliserons le plan par défaut
  5. Cliquer sur OK et nous pouvons commencer à construire l'esquisse

Nous sommes maintenant dans l'environnement Sketcher. En son sein, nous sommes en mesure d'utiliser la majorité des outils disponibles dans cet atelier.

Dans la Vue Combinée ', développer l'option' Edit controls 'et s'assurer que' Autoconstraints 'sont activés.

Création de la géométrie

Géométrie de construction de l'esquisse

La géométrie de construction est utilisée comme guide pour la création de profils complexes. Pour y accéder, nous devons activer le mode Construction '.

  1. Sélectionner Mode construction
  2. Sélectionner Ligne par 2 points
  3. Approcher le 'point d'origine' dans l'esquisse, le point devrait apparaître et près de votre curseur cette icône apparaîtra.
  4. Sélectionner le point et étendre la ligne en diagonale jusqu'à une longueur arbitraire.
  5. Répéter cette procédure jusqu'à ce qu'à créer cinq lignes 'construction' . S'Assurer de garder tout en diagonale.
  6. Pour quitter le mode construction, cliquer à nouveau sur Mode construction

Géométrie de l'esquisse =

La géométrie de l'esquisse est utilisée pour créer les profils fermés requis pour effectuer des opérations 3D dans le plan de travail 'PartDesign' .

  1. Sélectionner Circle
  2. Positionner son 'point central' sur l'origine de l'esquisse.
  3. Étendre la circonférence à une longueur arbitraire.


  1. Select Arc
  2. Approach the endpoint of one of the construction lines.
  3. Set the centerpoint' of the arc to be coincident with the endpoint.
  4. Select an arbitrary location of your cursor to be set as the beginning of the arc, by clicking once.
  5. Extend the arc an arbitrary amount, making sure the circumference opens outward (the empty space is facing towards the circle you created earlier).
  6. Repeat these steps for each construction line.


  1. Create an arc between each pair of the previous arcs, with their circumference pointing towards the circle.

We have now created the basic elements for our profile.

Constraints

Constraints are used to constrain the Degrees of Freedom of points and curves within sketcher.

Geometric Constraints

They are used to establish relations between points and curves without the use of dimensions.

  1. Select all five construction lines.
  2. Select Equal Length


  1. Select all five arcs centered on an endpoint of a line.
  2. Select Equal Length
  3. Repeat for all five arcs that are not centered on an endpoint.


  1. Select the construction line that is closest to the vertical axis.
  2. Select Vertical


  1. Select the endpoint of an arc and the endpoint closest to it.
  2. Select Tangent
  3. Repeat for each endpoint, until a closed profile is created.

As of this step, we have now created a closed profile that can be adjusted with the desired dimensions.


Datum Constraints

These are used to specify the distance between points in a particular direction and the dimensions of curves.

  1. Select the vertically constrained construction line.
  2. Select Vertical Distance
  3. Set the length to 30 mm.


  1. Select the vertical construction line and the line closest to it
  2. Select Internal Angle
  3. Set the angle to 72°
  4. Repeat the same procedure for each pair of adjacent lines.


  1. Select one of the arcs centered on the endpoint of a line.
  2. Select Radius
  3. Set the radius to 8 mm.
  4. Do the same for an arc not centered on an endpoint. Set the radius to 11 mm.
  5. Set the center circle radius to 10 mm.

You should end up with a fully constrained sketch. It can be comfirmed by noticing the change in color of all curves.

We are now finished with the basic workflow for the Sketcher Module.

Further Reading