Basic Sketcher Tutorial/de: Difference between revisions

From FreeCAD Documentation
No edit summary
(Created page with "# Wählen Sie das Werkzeug Bogen 24px. # Nähern Sie den Mauszeiger an einen der '''Endpunkte''' der Konstruktionslinien an. # S...")
Line 47: Line 47:




# Select [[Image:Sketcher_Arc.png|32px]] [[Sketcher_Arc|Arc]]
# Wählen Sie das Werkzeug [[Sketcher_Arc/de|Bogen]] [[Image:Sketcher_Arc.png|24px]].
# Nähern Sie den Mauszeiger an einen der '''Endpunkte''' der Konstruktionslinien an.
# Approach the '''endpoint''' of one of the construction lines.
# Setzen Sie den '''Mittelpunkt''' des Bogens auf den Endpunkt, sodass eine '''Koinzidenzbeschränkung''' erzeugt wird.
# Set the ''centerpoint''' of the arc to be '''coincident''' with the endpoint.
# Wählen Sie einen beliebigen Ort als Startpunkt des Bogens aus und klicken Sie darauf.
# Select an arbitrary location of your cursor to be set as the beginning of the arc, by clicking once.
# Vergrößern Sie den Bogen beliebig, aber achten Sie darauf, dass die Öffnung des Bogens in Richtung des zuvor erstellten Kreises zeigt.
# Extend the arc an arbitrary amount, making sure the circumference opens outward (the empty space is facing towards the circle you created earlier).
# Wiederholen Sie diese Schritte für jede Konstruktionslinie.
# Repeat these steps for each construction line.





Revision as of 19:58, 5 February 2016

Tutorial
Topic
{{{Topic}}}
Level
Anfänger
Time to complete
10 Minuten
Authors
Drei
FreeCAD version
0.16 oder neuer
Example files
See also
None

Einleitung

Dieses Tutorial soll den Leser in die grundlegenden Arbeitsschritte des Arbeitsbereichs Sketcher einführen.

Der Arbeitsbereich Sketcher existiert als eigenständiges Modul, kann allerdings auch im Arbeitsbereich PartDesign zum Zeichnen von Profilen verwendet werden.

Voraussetzungen

  • FreeCAD Version 0.16 oder neuer

Vorgehensweise

Erstellen einer Skizze

  1. Erzeugen Sie ein neues Dokument
  2. Wechseln Sie in den Arbeitsbereich Sketcher
  3. Klicken Sie auf Neue Skizze erstellen .

Wir befinden uns nun in der Sketcher-Umgebung. Innerhalb dieser Umgebung können wir die Mehrheit der Werkzeuge dieses Arbeitsbereichs nutzen.

Es sollte nun sichergestellt werden, dass in der Combo-Ansicht im Abschnitt Bedienelemente bearbeiten die Option Automatische Randbedingungen aktiviert ist.

Creating geometry

Sketcher construction geometry

Construction geometry is used as guides for the creation of complex profiles. To access it, we need to enable Construction mode .

  1. Select Construction Mode
  2. Select Line by 2 point
  3. Approach the origin point in the sketch, the point should highlight and near your cursor this icon will appear.
  4. Select the point and extend the line diagonally up to an arbitrary length.
  5. Repeat this procedure until you've created five construction lines. Be sure to keep all of them diagonal.
  6. To exit construction mode, simply click again on Construction Mode
Sketcher Geometrie

Sketcher Geometrie wird dazu verwendet, ein geschlossenes Profil zu skizzieren, das im Arbeitsbereich PartDesign für verschiedene 3D-Oprationen genutzt werden kann.

  1. Wählen Sie das Werkzeug Kreis .
  2. Setzen Sie den Mittelpunkt des Kreises in den Nullpunkt der Skizze (Schnittpunkt der Achsen).
  3. Erhöhen Sie den Umfang des Kreises auf einen beliebigen Wert.


  1. Wählen Sie das Werkzeug Bogen .
  2. Nähern Sie den Mauszeiger an einen der Endpunkte der Konstruktionslinien an.
  3. Setzen Sie den Mittelpunkt des Bogens auf den Endpunkt, sodass eine Koinzidenzbeschränkung erzeugt wird.
  4. Wählen Sie einen beliebigen Ort als Startpunkt des Bogens aus und klicken Sie darauf.
  5. Vergrößern Sie den Bogen beliebig, aber achten Sie darauf, dass die Öffnung des Bogens in Richtung des zuvor erstellten Kreises zeigt.
  6. Wiederholen Sie diese Schritte für jede Konstruktionslinie.


  1. Create an arc between each pair of the previous arcs, with their circumference pointing towards the circle.

We have now created the basic elements for our profile.

External Geometry

When a 3D element has been created it is possible to create references to it within a sketch.

  1. Select External Geometry.
  2. Approach the element that you wish to reference, the edge of a Pad for example.
  3. Click on it
  4. New elements of a different color should appear on the sketch in the location of the feature you wish to reference.


Constraints

Constraints are used to constrain the Degrees of Freedom of points and curves within sketcher.

Geometric Constraints

They are used to establish relations between points and curves without the use of dimensions.

  1. Select all five construction lines.
  2. Select Equal Length


  1. Select all five arcs centered on an endpoint of a line.
  2. Select Equal Length
  3. Repeat for all five arcs that are not centered on an endpoint.


  1. Select the construction line that is closest to the vertical axis.
  2. Select Vertical


  1. Select the endpoint of an arc and the endpoint closest to it.
  2. Select Tangent
  3. Repeat for each endpoint, until a closed profile is created.

As of this step, we have now created a closed profile that can be adjusted with the desired dimensions.


Datum Constraints

These are used to specify the distance between points in a particular direction and the dimensions of curves.

  1. Select the vertically constrained construction line.
  2. Select Vertical Distance
  3. Set the length to 30 mm.


  1. Select the vertical construction line and the line closest to it
  2. Select Internal Angle
  3. Set the angle to 72°
  4. Repeat the same procedure for each pair of adjacent lines.


  1. Select one of the arcs centered on the endpoint of a line.
  2. Select Radius
  3. Set the radius to 8 mm.
  4. Do the same for an arc not centered on an endpoint. Set the radius to 11 mm.
  5. Set the center circle radius to 10 mm.

You should end up with a fully constrained sketch. It can be comfirmed by noticing the change in color of all curves.

We are now finished with the basic workflow for the Sketcher Module.

Further Reading