Assembly3 BaugruppeAnlegen

From FreeCAD Documentation
Revision as of 22:13, 10 September 2021 by FBXL5 (talk | contribs) (Created page with "Der Befehl '''Assembly3 Baugruppe anlegen''' fügt dem Konstruktionsbaum ein neues '''Assembly'''-Astobjekt hinzu.")

Diese Dokumentation ist noch nicht fertiggestellt. Bitte hilf mit und trage etwas zur Dokumentation bei.

Die Seite GuiBefehl Modell erklärt, wie Befehle dokumentiert werden sollten. Unter Category:UnfinishedDocu findest du weitere unvollständige Seiten wie diese (und unter Category:UnfinishedDocu/de unvollständige Übersetzungen). Siehe Category:Command Reference für sämtliche Befehle (und Category:UnfinishedDocu/de für vorhandene Übersetzungen).

Siehe WikiSeiten, um zu lernen, wie die Wiki-Seiten bearbeitet werden und FreeCAD Unterstützen, um andere Wege zu entdecken, wie du einen Beitrag leisten kannst.

Other languages:

Assembly3 BaugruppeAnlegen

Menüeintrag
Keiner
Arbeitsbereich
Assembly3
Standardtastenkürzel
A N
Eingeführt in Version
-
Siehe auch
Keiner

Beschreibung

Der Befehl Assembly3 Baugruppe anlegen fügt dem Konstruktionsbaum ein neues Assembly-Astobjekt hinzu.

Each branch object is an Assembly container and holds four group containers:

- One for the Constraints (which is hidden as long as it is empty)
- One for the Elements
- One for the Parts
- One for the Relations (which is hidden by default and will be revealed when the Go to relation command is used)

The added Assembly object with all visible containers looks like this (0.20.pre and Link Branch):

Anwendung

  1. Create an empty assembly container by pressing Create assembly
    or use the keyboard shortcut: A then N