Assembly3 ConstraintEqualLineArcLength

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Assembly3 ConstraintEqualLineArcLength

Menu location
None
Workbenches
Assembly3
Default shortcut
None
Introduced in version
-
See also
None

Description edit

The   Equal Line Arc Length command constrains the length of a 2D line like a non-subdivided wire which is made with   Draft Workbench tools in relation with a   workplane.

It links the length of the 2D line with the length of an arc (2D or 3D?).

The length value of the selected line equals the length of selected arc.

Since I couldn't get this tool working here's the statement of the tool tip: 

Add an "EqualLineArcLength" constraint to make a line of the same length as an arc.

Usage edit

  1. Select the 2D line to be constrained.
  2. Select a 2D arc to read its length value.
  3. Activate the   Equal Line Arc Length command using the:
  4. Press the   Solve constraints or the   Quick solve button to recompute
(if   Auto recompute and   Smart recompute are disabled).


Depending on the order of the selected line types following errors appear:

Constraint "EqualLineArcLength" requires the 1st element to be a linear edge
Constraint "EqualLineArcLength" requires the 2nd element to be an arc edge
Constraint "EqualLineArcLength" requires the 2nd element to be a circular edge