Arch CutPlane

From FreeCAD Documentation
Revision as of 07:35, 11 September 2023 by Roy 043 (talk | contribs) (Updated to match Arch_CutLine.)

Arch CutPlane

Menu location
Arch → Cut Plane
Workbenches
Arch
Default shortcut
None
Introduced in version
-
See also
Arch CutLine

Description

The Arch CutPlane tool cuts a solid Arch object like an Arch Wall or Arch Structure with a planar face.

Left: Before applying the CutPlane tool. Middle: resulting wall after the cut is done. Right: yet another optional result

Usage

  1. Select the object to be cut in the tree view or the 3D view.
  2. Select a planar face. This must be selected in the 3D view.
  3. Press the Cut Plane button.
  4. Choose Behind or Front to indicate on which side of the cutting face material should be removed.
  5. Press the OK button.

Scripting

See also: Arch API and FreeCAD Scripting Basics.

The CutPlane tool can be used in macros and from the Python console by using the following function:

cutObj = cutComponentwithPlane(archObject, cutPlane, sideFace)
  • Creates a cutObj object from the given archObject, which is cut by cutPlane, which is the face of another object.
    • archObject should be a SelectionObject obtained from FreeCADGui.Selection.SelectionEx()[0].
    • cutPlane should be a FaceObject obtained from FreeCADGui.Selection.SelectionEx()[0].SubObjects[0].
  • sideFace specifies on which side of the FaceObject a volume will be created; this volume will then be used to subtract from the archObject. If sideFace is 0 it will create a volume in the rear of the face, otherwise it create it in front of the face.

Example:

import FreeCAD, FreeCADGui, Draft, Arch

p1 = FreeCAD.Vector(0, 0, 0)
p2 = FreeCAD.Vector(2000, 2000, 0)

Line = Draft.makeWire([p1, p2])
Wall = Arch.makeWall(Line, width=150, height=2000)

p3 = FreeCAD.Vector(0, 2000, 0)
p4 = FreeCAD.Vector(3000, 0, 0)

Line2 = Draft.makeWire([p3, p4])
Wall2 = Arch.makeWall(Line2, width=150, height=2000)
FreeCAD.ActiveDocument.recompute()

# Select the Wall
main_object = FreeCADGui.Selection.getSelectionEx()[0]

# Select the face of Wall2
selection = FreeCADGui.Selection.getSelectionEx()[0]
cut_face = selection.SubObjects[0]

cutObj = Arch.cutComponentwithPlane(main_object, cut_face, 0)
FreeCAD.ActiveDocument.recompute()

Wall3 = Draft.move(Wall, FreeCAD.Vector(-4000, 0, 0), copy=True)
Wall4 = Draft.move(Wall2, FreeCAD.Vector(-4000, 0, 0), copy=True)
FreeCAD.ActiveDocument.recompute()

# Select the Wall3
main_object2 = FreeCADGui.Selection.getSelectionEx()[0]

# Select the face of Wall4
selection2 = FreeCADGui.Selection.getSelectionEx()[0]
cut_face2 = selection2.SubObjects[0]

cutObj2 = Arch.cutComponentwithPlane(main_object2, cut_face2, 1)
FreeCAD.ActiveDocument.recompute()