All translations

Enter a message name below to show all available translations.

Message

Found 5 translations.

NameCurrent message text
 h Deutsch (de)* Wird eine Analyse mit dem Löser [[Image:FEM_SolverCalculixCxxtools.svg|24px]] [[FEM_SolverCalculixCxxtools/de|CalculiX]] durchgeführt, wird jetzt auch eine [[FEM_PostPipelineFromResult/de|Ergebnis-Pipeline]] zur Darstellung der Ergebnisse erstellt.[https://github.com/FreeCAD/FreeCAD/pull/8525 Pull request #8525] und [https://github.com/FreeCAD/FreeCAD/pull/8903 Pull request #8903]
* Es können jetzt auch [[FEM_SolverElmer_SolverSettings#Timestepping_(transient_analyses)|transient analyses]] durchgeführt werden, wenn der Löser [[Image:FEM_SolverElmer.svg|32px]] [[FEM_SolverElmer/de|Elmer]] verwendet wird. [https://github.com/FreeCAD/FreeCAD/pull/9056 Pull request #9056]
* Die [[Image:FEM_ConstraintInitialPressure.svg|24px]] [[FEM_ConstraintInitialPressure/de|StartbedingungDruck]] wurde hinzugefügt, um einen Startwert für den inneren Druck eines Fluids festzulegen. [https://github.com/FreeCAD/FreeCAD/pull/7364 Pull request #7364]
* Die [[Image:FEM_ConstraintCurrentDensity.svg|24px]] [[FEM_ConstraintCurrentDensity/de|RandbedingungStromdichte]] wurde hinzugefügt, um die Stromdichte für Körper und Flächen festzulegen. [https://github.com/FreeCAD/FreeCAD/pull/8348 Pull request #8348]
* Die [[Image:FEM_ConstraintMagnetization.svg|24px]] [[FEM_ConstraintMagnetization/de|RandbedingungMagnetisierung]] wurde hinzugefügt, um die Magnetisierung von Körper und Flächen festzulegen. [https://github.com/FreeCAD/FreeCAD/pull/8393 Pull request #8393]
* Die [[Image:FEM_ConstraintFlowVelocity.svg|24px]] [[FEM_ConstraintFlowVelocity/de|RandbedingungStrömungsgeschwindigkeit]] und die [[Image:FEM_ConstraintInitialFlowVelocity.svg|24px]] [[FEM_ConstraintInitialFlowVelocity/de|StartbedingungStrömungsgeschwindigkeit]] wurden komplett überarbeitet. Es ist jetzt auch möglich, eine Geschwindigkeit durch eine mathematische Formel anzugeben (um ein Geschwindigkeitsprofil festzulegen). [https://github.com/FreeCAD/FreeCAD/pull/8963 Pull request #8963] und [https://github.com/FreeCAD/FreeCAD/pull/8964 Pull request #8964]</br>'''Hinweis:''' Dies bricht mit alten Abläufen. Analyse mit existierenden Rand- und Startbedingungen für Strömungsgeschwindigkeiten werden nicht mehr funktionieren. Sie müssen in der Analyse neu erstellt werden, damit vorhandene Analysen wieder funktionieren.</br>'''Noch ein Hinweis:''' bis FreeCAD 0.21 waren die Ergebnisse des Strömungslösers falsch (Fluid-Dichte und -Viskosität waren um den Faktor 1000 zu hoch). Die notwendige Neuerstellung der Randbedingung für die Geschwindigkeit sorgt jetzt auch dafür, dass die Ergebnisse korrekt sind.
* Es ist jetzt auch möglich, in der [[Image:FEM_ConstraintDisplacement.svg|24px]] [[FEM_ConstraintDisplacement/de|RandbedingungVersatz]] die Versatzwerte als Ausdrücke anzugeben (Versatz zum aktuellen  Löser-Zeitpunkt).
* Die [[Image:FEM_ConstraintBodyHeatSource.svg|24px]] [[FEM_ConstraintBodyHeatSource/de|RandbedingungKörperwärmequelle]] besitzt jetzt einen Aufgaben-Bereich und es ist möglich, die Wärme für mehrere Körper festzulegen oder mehrere Randbedingungen für unterschiedliche Körper in einer Analyse zu verwenden. [https://github.com/FreeCAD/FreeCAD/pull/7367 Pull request #7367]
* Die [[Image:FEM_ConstraintSpring.svg|24px]] [[FEM_ConstraintSpring/de|RandbedingungFeder]] wurde von keinem Löser verwendet. Jetzt kann sie mit dem Löser  [[FEM_SolverElmer/de|Elmer]] durch die Gleichungen für [[FEM_EquationDeformation/de|Verformung]] und [[FEM_EquationElasticity|Elastizität]] verwendet werden. [https://github.com/FreeCAD/FreeCAD/pull/9005 Pull request #9005]
* Die Ergebnisnetz-Schnittfunktion [[Image:FEM_PostCreateFunctionCylinder.svg|24px]] [[FEM_PostCreateFunctionCylinder/de|NachbereitungFunktionZylinder]] wurde hinzugefügt.[https://github.com/FreeCAD/FreeCAD/pull/8735 Pull request #8735]
* Die Ergebnisnetz-Schnittfunktion [[Image:FEM_PostCreateFunctionBox.svg|24px]] [[FEM_PostCreateFunctionBox/de|NachbereitungFunktionQuader]] wurde hinzugefügt.[https://github.com/FreeCAD/FreeCAD/pull/8825 Pull request #8825]
* Es ist jetzt auch möglich, *.pvtu-Dateien (partitioned VTK unstructured grid data) zu öffnen (und auf diesem Weg anzuzeigen) . Eine *.pvtu-Datei ist auch das Ergebnis einer [[FEM_SolverElmer/de|Elmer]]-Simulation, wenn mehr als ein CPU-Kern für Berechnungen verwendet wird. [https://github.com/FreeCAD/FreeCAD/pull/7159 Pull request #7159]
* Critical Strain Ratio (<- ?) wurde zur VTK-Ergebnis-Pipeline hinzugefügt. Es gibt ein indication of ductile rupture (<- ?) für Werkstoffe mit einem "MaterialMechanicalNonlinear"-Objekt. [https://github.com/FreeCAD/FreeCAD/pull/7467 Pull request #7467]
* [[Image:FEM_FemMesh2Mesh.svg|24px]] [[FEM_FemMesh2Mesh/de|FEM FemNetzZuNetz]] hat den neuen Parameter ''scale'' zum Festlegen des Maßstabes verformter Netze mit Python.[https://forum.freecadweb.org/viewtopic.php?f=18&t=71936 Forum thread] und [https://github.com/FreeCAD/FreeCAD/pull/7715 Pull request #7715]
* Die [[FEM_Preferences/de|Einstellungen]] haben eine neue Option zum Festlegen, welcher Löser automatisch hinzugefügt werden soll, wenn eine neue Analyse erstellt wird.
** Befindet man sich im Arbeitsbereich FEM, wenn man eine FreeCAD-Datei lädt, die eine Analyse enthält, dann wird die Analyse automatisch aktiviert (man erhält sofort Zugriff auf alle Schaltflächen der FEM-Symbolleiste).
** Die Symbolleiste enthält nur Schaltflächen für auf dem System installierte Löser. Nicht zur Verfügung stehende Löser werden nicht mehr angezeigt.
* Neue Beispieldateien für die folgenden Gleichungen sind in den [[FEM_Examples/de|FEM Beispielen]] vorhanden: [[FEM_EquationDeformation/de|Verformung]], [[FEM_EquationFlow/de|Strömung]], [[FEM_EquationFlux/de|Fluss]], [[FEM_EquationHeat/de|Wärme]], [[FEM_EquationMagnetodynamic/de|Magnetodynamik]] and [[FEM_EquationMagnetodynamic2D/de| 2D-Magnetodynamik]]. Pull requests [https://github.com/FreeCAD/FreeCAD/pull/8550 #8550], [https://github.com/FreeCAD/FreeCAD/pull/8569 #8569], [https://github.com/FreeCAD/FreeCAD/pull/8579 #8579], [https://github.com/FreeCAD/FreeCAD/pull/8597 #8597], [https://github.com/FreeCAD/FreeCAD/pull/8630 #8630] und [https://github.com/FreeCAD/FreeCAD/pull/9004 #9004].
* Neue Werkstoffkarten für Kohlen(stoff)dioxyd und eine Titanlegierung. [https://github.com/FreeCAD/FreeCAD/pull/8332 Pull request #8332] und [https://github.com/FreeCAD/FreeCAD/pull/8636 Pull request #8636]
 h English (en)* When performing analyses using the [[Image:FEM_SolverCalculixCxxtools.svg|24px]] [[FEM_SolverCalculixCxxtools|CalculiX solver]], there is now also a [[FEM_PostPipelineFromResult|results pipeline]] created to visualize the results. [https://github.com/FreeCAD/FreeCAD/pull/8525 Pull request #8525] and [https://github.com/FreeCAD/FreeCAD/pull/8903 Pull request #8903]
* It is now possible to perform [[FEM_SolverElmer_SolverSettings#Timestepping_(transient_analyses)|transient analyses]] when using the [[Image:FEM_SolverElmer.svg|32px]] [[FEM_SolverElmer|Elmer solver]]. [https://github.com/FreeCAD/FreeCAD/pull/9056 Pull request #9056]
* The [[Image:FEM_ConstraintInitialPressure.svg|24px]] [[FEM_ConstraintInitialPressure|initial pressure constraint]] was added to set the initial internal pressure of fluids. [https://github.com/FreeCAD/FreeCAD/pull/7364 Pull request #7364]
* The [[Image:FEM_ConstraintCurrentDensity.svg|24px]] [[FEM_ConstraintCurrentDensity|current density constraint]] was added to set current densities for bodies and faces. [https://github.com/FreeCAD/FreeCAD/pull/8348 Pull request #8348]
* The [[Image:FEM_ConstraintMagnetization.svg|24px]] [[FEM_ConstraintMagnetization|magnetization constraint]] was added to set magnetizations for bodies and faces. [https://github.com/FreeCAD/FreeCAD/pull/8393 Pull request #8393]
* The [[Image:FEM_ConstraintFlowVelocity.svg|24px]] [[FEM_ConstraintFlowVelocity|flow velocity constraint]] and [[Image:FEM_ConstraintInitialFlowVelocity.svg|24px]] [[FEM_ConstraintInitialFlowVelocity|initial flow velocity constraint]] were completely rewritten. It is now also possible to specify a velocity via a math formula (to define a velocity profile). [https://github.com/FreeCAD/FreeCAD/pull/8963 Pull request #8963] and [https://github.com/FreeCAD/FreeCAD/pull/8964 Pull request #8964]</br>'''Note:''' This is a breaking change. Analyses with existing flow velocity and initial flow velocity constraints will not work anymore. You have to create new flow velocity constraints in the analysis to make existing analyses work.</br>'''Also note:''' until FreeCAD 0.21 the results of the flow solver were wrong (fluid density and viscosity were a factor 1000 too high). Therefore the necessary recreation of the velocity constraint also assures the results will be correct.
* It is now possible to define in the [[Image:FEM_ConstraintDisplacement.svg|24px]] [[FEM_ConstraintDisplacement|displacement constraint]] displacements as equations (displacement according to the current solver time).
* The [[Image:FEM_ConstraintBodyHeatSource.svg|24px]] [[FEM_ConstraintBodyHeatSource|body heat source constraint]] has now a task panel and it is possible to set the heat for several bodies or to use several constraints for different bodies in one analysis. [https://github.com/FreeCAD/FreeCAD/pull/7367 Pull request #7367]
* The [[Image:FEM_ConstraintSpring.svg|24px]] [[FEM_ConstraintSpring|spring constraint]] was not used by any solver. Now it can be used by the [[FEM_SolverElmer|Elmer]] solver via the equations [[FEM_EquationDeformation|Deformation]] and [[FEM_EquationElasticity|Elasticity]]. [https://github.com/FreeCAD/FreeCAD/pull/9005 Pull request #9005]
* The result mesh cut function [[Image:FEM_PostCreateFunctionCylinder.svg|24px]] [[FEM_PostCreateFunctionCylinder|Filter function cylinder]] was added. [https://github.com/FreeCAD/FreeCAD/pull/8735 Pull request #8735]
* The result mesh cut function [[Image:FEM_PostCreateFunctionBox.svg|24px]] [[FEM_PostCreateFunctionBox|Filter function box]] was added. [https://github.com/FreeCAD/FreeCAD/pull/8825 Pull request #8825]
* It is now possible to open (and this way visualize) *.pvtu files (partitioned VTK unstructured grid data). A *.pvtu file is also the result of an [[FEM_SolverElmer|Elmer]] simulation, when more than one CPU core is used for calculations. [https://github.com/FreeCAD/FreeCAD/pull/7159 Pull request #7159]
* Critical Strain Ratio has been added to the VTK result pipeline. It gives an indication of ductile rupture for materials with a "MaterialMechanicalNonlinear" object. [https://github.com/FreeCAD/FreeCAD/pull/7467 Pull request #7467]
* [[Image:FEM_FemMesh2Mesh.svg|24px]] [[FEM_FemMesh2Mesh|FEM mesh to mesh]] has the new parameter ''scale'' to define the scale of deformed mesh using Python. [https://forum.freecadweb.org/viewtopic.php?f=18&t=71936 Forum thread] and [https://github.com/FreeCAD/FreeCAD/pull/7715 Pull request #7715]
* The [[FEM_Preferences|preferences]] have a new option to define which solver should automatically be added when creating a new analysis.
* Usability improvements:
** If you are in the FEM workbench when loading a FreeCAD file containing an analysis, the analysis gets activated automatically (you have immediate access to all FEM toolbar buttons).
** The toolbar only has buttons for solvers installed on your system. Unavailable solvers are no longer displayed.
* New example files for the following equations are available via the [[FEM_Examples|FEM Examples]]: [[FEM_EquationDeformation|Deformation]], [[FEM_EquationFlow|Flow]], [[FEM_EquationFlux|Flux]], [[FEM_EquationHeat|Heat]], [[FEM_EquationMagnetodynamic|Magnetodynamic]] and [[FEM_EquationMagnetodynamic2D|Magnetodynamic 2D]]. Pull requests [https://github.com/FreeCAD/FreeCAD/pull/8550 #8550], [https://github.com/FreeCAD/FreeCAD/pull/8569 #8569], [https://github.com/FreeCAD/FreeCAD/pull/8579 #8579], [https://github.com/FreeCAD/FreeCAD/pull/8597 #8597], [https://github.com/FreeCAD/FreeCAD/pull/8630 #8630] and [https://github.com/FreeCAD/FreeCAD/pull/9004 #9004].
* New material card for carbon dioxide and a titanium alloy. [https://github.com/FreeCAD/FreeCAD/pull/8332 Pull request #8332] and [https://github.com/FreeCAD/FreeCAD/pull/8636 Pull request #8636]
 h français (fr)* Lors de l'exécution d'analyses à l'aide du [[Image:FEM_SolverCalculixCxxtools.svg|24px]] [[FEM_SolverCalculixCxxtools/fr|solveur CalculiX]], un [[FEM_PostPipelineFromResult/fr|pipeline de resultats]] est désormais créé pour visualiser les résultats. [https://github.com/FreeCAD/FreeCAD/pull/8525 Pull request #8525] et [https://github.com/FreeCAD/FreeCAD/pull/8903 Pull request #8903]
* Il est maintenant possible d'effectuer [[FEM_SolverElmer_SolverSettings/fr#Pas_de_temps_(analyses_transitoires)|analyses transitoires]] lors de l'utilisation du [[Image:FEM_SolverElmer.svg|32px]] [[FEM_SolverElmer/fr|solveur Elmer]]. [https://github.com/FreeCAD/FreeCAD/pull/9056 Pull request #9056]
* La [[Image:FEM_ConstraintInitialPressure.svg|24px]] [[FEM_ConstraintInitialPressure/fr|pression initiale]] a été ajoutée pour définir la pression interne initiale des fluides. [https://github.com/FreeCAD/FreeCAD/pull/7364 Pull request #7364]
* La [[Image:FEM_ConstraintCurrentDensity.svg|24px]] [[FEM_ConstraintCurrentDensity/fr|densité de courant]] a été ajoutée pour définir les densités de courant des corps et des faces. [https://github.com/FreeCAD/FreeCAD/pull/8348 Pull request #8348]
* La [[Image:FEM_ConstraintMagnetization.svg|24px]] [[FEM_ConstraintMagnetization|magnétisation]] a été ajoutée pour définir les magnétisations des corps et des faces. [https://github.com/FreeCAD/FreeCAD/pull/8393 Pull request #8393]
* La [[Image:FEM_ConstraintFlowVelocity.svg|24px]] [[FEM_ConstraintFlowVelocity/fr|Vitesse d'écoulement comme condition limite]] et la [[Image:FEM_ConstraintInitialFlowVelocity.svg|24px]] [[FEM_ConstraintInitialFlowVelocity/fr|Vitesse initiale d'écoulement]] ont été complètement réécrites. Il est maintenant également possible de spécifier une vitesse via une formule mathématique (pour définir un profil de vitesse). [https://github.com/FreeCAD/FreeCAD/pull/8963 Pull request #8963] et [https://github.com/FreeCAD/FreeCAD/pull/8964 Pull request #8964]</br>'''Remarque :''' il s'agit d'un changement majeur. Les analyses avec des contraintes de vitesse d'écoulement et de vitesse d'écoulement initiale existantes ne fonctionneront plus. Vous devez créer de nouvelles contraintes de vitesse d'écoulement dans l'analyse pour que les analyses existantes fonctionnent. [https://github.com/FreeCAD/FreeCAD/pull/8963 Pull request #8963] et [https://github.com/FreeCAD/FreeCAD/pull/8964 Pull request #8964]</br>'''Remarque bis :''' jusqu'à FreeCAD 0.21, les résultats du solveur d'écoulement étaient erronés (la densité et la viscosité du fluide étaient trop élevées d'un facteur 1000). Par conséquent, la refonte de la contrainte de vitesse garantit également que les résultats seront corrects.
* Il est maintenant possible de définir dans la [[Image:FEM_ConstraintDisplacement.svg|24px]] [[FEM_ConstraintDisplacement/fr|condition limite de déplacement]] des déplacements définis par des équations (déplacement en fonction du temps du solveur utlisé).
* La [[Image:FEM_ConstraintBodyHeatSource.svg|24px]] [[FEM_ConstraintBodyHeatSource/fr|Source de chaleur du corps]] a maintenant un panneau de tâches et il est possible de définir la chaleur pour plusieurs corps ou d'utiliser plusieurs contraintes pour différents corps dans une analyse. [https://github.com/FreeCAD/FreeCAD/pull/7367 Pull request #7367]
* La commande [[Image:FEM_ConstraintSpring.svg|24px]] [[FEM_ConstraintSpring/fr|Ressort]] n'était utilisée par aucun solveur. Elle peut maintenant être utilisée par le solveur [[FEM_SolverElmer/fr|Elmer]] via les équations de [[FEM_EquationDeformation/fr|déformation]] et d'[[FEM_EquationElasticity/fr|élasticité]]. [https://github.com/FreeCAD/FreeCAD/pull/9005 Pull request #9005]
* La fonction de découpage du maillage résultant [[Image:FEM_PostCreateFunctionCylinder.svg|24px]] [[FEM_PostCreateFunctionCylinder/fr|Filtre fonction cylindre]] a été ajoutée. [https://github.com/FreeCAD/FreeCAD/pull/8735 Pull request #8735]
* La fonction de découpage du maillage résultant [[Image:FEM_PostCreateFunctionBox.svg|24px]] [[FEM_PostCreateFunctionBox/fr|Filtre fonction boîte]] a été ajoutée. [https://github.com/FreeCAD/FreeCAD/pull/8825 Pull request #8825]
* Il est maintenant possible d'ouvrir (et ainsi de visualiser) des fichiers *.pvtu (données de grille non structurées VTK partitionnées). Un fichier *.pvtu est également le résultat d'une simulation par [[FEM_SolverElmer/fr|Elmer]], lorsque plus d'un cœur de CPU est utilisé pour les calculs. [https://github.com/FreeCAD/FreeCAD/pull/7159 Pull request #7159]
* Le rapport de déformation critique a été ajouté au pipeline de résultats de VTK. Il donne une indication de la rupture ductile pour les matériaux avec un objet "MaterialMechanicalNonlinear" (Matériau mécanique non linéaire). [https://github.com/FreeCAD/FreeCAD/pull/7467 Pull request #7467]
* [[Image:FEM_FemMesh2Mesh.svg|24px]] [[FEM_FemMesh2Mesh/fr|Maillage FEM à maillage]] a le nouveau paramètre ''scale'' pour définir l'échelle du maillage déformé en utilisant Python.  [https://forum.freecadweb.org/viewtopic.php?f=18&t=71936 Fil du forum] et [https://github.com/FreeCAD/FreeCAD/pull/7715 Pull request #7715]
* Les [[FEM_Preferences/fr|préférences]] ont une nouvelle option pour définir quel solveur doit être automatiquement ajouté lors de la création d'une nouvelle analyse.
* Amélioration de l'ergonomie :
** Si vous vous trouvez dans l'atelier FEM lorsque vous chargez un fichier FreeCAD contenant une analyse, l'analyse est activée automatiquement (vous avez immédiatement accès à tous les boutons de la barre d'outils FEM).
** La barre d'outils ne contient que des boutons pour les solveurs installés sur votre système. Les solveurs non disponibles ne sont plus affichés.
* De nouveaux fichiers d'exemples pour les équations suivantes sont disponibles dans les [[FEM_Examples/fr|FEM Exemples]] : [[FEM_EquationDeformation/fr|déformation]], [[FEM_EquationFlow/fr|écoulement]], [[FEM_EquationFlux/fr|flux]], [[FEM_EquationHeat/fr|chaleur]], [[FEM_EquationMagnetodynamic/fr|magnétodynamique]] et [[FEM_EquationMagnetodynamic2D/fr|magnétodynamique 2D]]. [https://github.com/FreeCAD/FreeCAD/pull/8550 #8550], [https://github.com/FreeCAD/FreeCAD/pull/8569 Pull request #8569], [https://github.com/FreeCAD/FreeCAD/pull/8579 Pull request #8579], [https://github.com/FreeCAD/FreeCAD/pull/8597 Pull request #8597], [https://github.com/FreeCAD/FreeCAD/pull/8630 Pull request #8630] et [https://github.com/FreeCAD/FreeCAD/pull/9004 #9004].
* Nouvelle carte de matériau pour le dioxyde de carbone et un alliage de titane. [https://github.com/FreeCAD/FreeCAD/pull/8332 Pull request #8332] et [https://github.com/FreeCAD/FreeCAD/pull/8636 Pull request #8636]
 h italiano (it)* Quando si eseguono analisi utilizzando il [[Image:FEM_SolverCalculixCxxtools.svg|24px]] [[FEM_SolverCalculixCxxtools/it|risolutore CalculiX]], ora c'è anche una [[FEM_PostPipelineFromResult/it|results pipeline]] creata per visualizzare i risultati. [https://github.com/FreeCAD/FreeCAD/pull/8525 Pull request n. 8525] e [https://github.com/FreeCAD/FreeCAD/pull/8903 Pull request n. 8903]
* Ora è possibile eseguire [[FEM_SolverElmer_SolverSettings/it#Timestepping_(transient_analyses)|analisi transitorie]] quando si utilizza il [[Image:FEM_SolverElmer.svg|32px]] [[FEM_SolverElmer/it|risolutore Elmer]]. [https://github.com/FreeCAD/FreeCAD/pull/9056 Pull request n. 9056]
* Il [[Image:FEM_ConstraintInitialPressure.svg|24px]] [[FEM_ConstraintInitialPressure/it|vincolo di pressione iniziale]] è stato aggiunto per impostare la pressione interna iniziale dei fluidi. [https://github.com/FreeCAD/FreeCAD/pull/7364 Pull request n. 7364]
* Il [[Image:FEM_ConstraintCurrentDensity.svg|24px]] [[FEM_ConstraintCurrentDensity/it|vincolo di densità corrente]] è stato aggiunto per impostare le densità correnti per corpi e facce. [https://github.com/FreeCAD/FreeCAD/pull/8348 Pull request n. 8348]
* Il [[Image:FEM_ConstraintMagnetization.svg|24px]] [[FEM_ConstraintMagnetization/it|vincolo di magnetizzazione]] è stato aggiunto per impostare le magnetizzazioni per corpi e facce. [https://github.com/FreeCAD/FreeCAD/pull/8393 Pull request n. 8393]
* Il [[Image:FEM_ConstraintFlowVelocity.svg|24px]] [[FEM_ConstraintFlowVelocity/it|vincolo di velocità del flusso]] e [[Image:FEM_ConstraintInitialFlowVelocity.svg|24px]] [[FEM_ConstraintInitialFlowVelocity/it|vincolo di velocità del flusso iniziale]] sono stati completamente riscritti. Ora è anche possibile specificare una velocità tramite una formula matematica (per definire un profilo di velocità). [https://github.com/FreeCAD/FreeCAD/pull/8963 Pull request n. 8963] e [https://github.com/FreeCAD/FreeCAD/pull/8964 Pull request n. 8964]</br>''' Nota:''' Questa è una modifica importante. Le analisi con la velocità del flusso esistente e i vincoli di velocità del flusso iniziale non funzioneranno più. È necessario creare nuovi vincoli di velocità del flusso nell'analisi per far funzionare le analisi esistenti.</br>'''Nota inoltre:''' fino a FreeCAD 0.21 i risultati del risolutore di flusso erano errati (densità e viscosità del fluido erano un fattore 1000 troppo alto). Pertanto la necessaria ricreazione del vincolo di velocità assicura anche che i risultati saranno corretti.
* È ora possibile definire nei [[Image:FEM_ConstraintDisplacement.svg|24px]] [[FEM_ConstraintDisplacement/it|vincoli di spostamento]] gli spostamenti come equazioni (spostamento in base al tempo corrente del risolutore).
* Il [[Image:FEM_ConstraintBodyHeatSource.svg|24px]] [[FEM_ConstraintBodyHeatSource/it|vincolo della fonte di calore corporeo]] ha ora un pannello delle attività ed è possibile impostare il calore per diversi corpi o utilizzare diversi vincoli per diversi corpi in un'unica analisi . [https://github.com/FreeCAD/FreeCAD/pull/7367 Pull request n. 7367]
* Il [[Image:FEM_ConstraintSpring.svg|24px]] [[FEM_ConstraintSpring/it|vincolo a molla]] non è stato utilizzato da nessun risolutore. Ora può essere utilizzato dal risolutore [[FEM_SolverElmer/it|Elmer]] tramite le equazioni [[FEM_EquationDeformation/it|Deformazione]] e [[FEM_EquationElasticity/it|Elasticity]]. [https://github.com/FreeCAD/FreeCAD/pull/9005 Pull request n. 9005]
* È stata aggiunta la funzione di taglio mesh risultante [[Image:FEM_PostCreateFunctionCylinder.svg|24px]] [[FEM_PostCreateFunctionCylinder/it|Filter function cylinder]]. [https://github.com/FreeCAD/FreeCAD/pull/8735 Pull request n. 8735]
* È stata aggiunta la funzione di taglio mesh dei risultati [[Image:FEM_PostCreateFunctionBox.svg|24px]] [[FEM_PostCreateFunctionBox/it|Filter function box]]. [https://github.com/FreeCAD/FreeCAD/pull/8825 Pull request n. 8825]
* Ora è possibile aprire (e quindi visualizzare) file *.pvtu (dati di griglia non strutturati VTK partizionati). Un file *.pvtu è anche il risultato di una simulazione [[FEM_SolverElmer/it|Elmer]], quando per i calcoli viene utilizzato più di un core della CPU. [https://github.com/FreeCAD/FreeCAD/pull/7159 Pull request n. 7159]
* Il rapporto di deformazione critica è stato aggiunto alla pipeline dei risultati VTK. Fornisce un'indicazione della rottura duttile per i materiali con un oggetto "MaterialMechanicalNonlinear". [https://github.com/FreeCAD/FreeCAD/pull/7467 Pull request n. 7467]
* [[Image:FEM_FemMesh2Mesh.svg|24px]] [[FEM_FemMesh2Mesh/it|FEM mesh to mesh]] ha il nuovo parametro ''scale'' per definire la scala della mesh deformata usando Python. [https://forum.freecadweb.org/viewtopic.php?f=18&t=71936 Discussione del forum] e [https://github.com/FreeCAD/FreeCAD/pull/7715 Pull request n. 7715]
* Le [[FEM_Preferences/it|preferences]] hanno una nuova opzione per definire quale solutore deve essere aggiunto automaticamente quando si crea una nuova analisi.
* Miglioramenti dell'usabilità:
** Se ci si trova nell'ambiente FEM durante il caricamento di un file di FreeCAD contenente un'analisi, l'analisi viene attivata automaticamente (si ha accesso immediato a tutti i pulsanti della barra degli strumenti FEM).
** La barra degli strumenti ha solo pulsanti per i risolutori installati sul tuo sistema. I risolutori non disponibili non vengono più visualizzati.
* Nuovi file di esempio per le seguenti equazioni sono disponibili tramite [[FEM_Examples/it|FEM Examples]]: [[FEM_EquationDeformation/it|Deformation]], [[FEM_EquationFlow/it|Flow]], [[FEM_EquationFlux/it|Flux]], [[FEM_EquationHeat/it|Heat]], [[FEM_EquationMagnetodynamic/it|Magnetodynamic]] e [[FEM_EquationMagnetodynamic2D/it|Magnetodynamic 2D]]. Pull request [https://github.com/FreeCAD/FreeCAD/pull/8550 #8550], [https://github.com/FreeCAD/FreeCAD/pull/8569 #8569], [https://github.com /FreeCAD/FreeCAD/pull/8579 #8579], [https://github.com/FreeCAD/FreeCAD/pull/8597 #8597], [https://github.com/FreeCAD/FreeCAD/pull/8630 #8630 ] e [https://github.com/FreeCAD/FreeCAD/pull/9004 #9004].
* Nuova scheda materiale per l'anidride carbonica e una lega di titanio. [https://github.com/FreeCAD/FreeCAD/pull/8332 Pull request n. 8332] e [https://github.com/FreeCAD/FreeCAD/pull/8636 Pull request n. 8636]
 h polski (pl)* Podczas wykonywania analiz przy użyciu [[Image:FEM_SolverCalculixCxxtools.svg|24px]] [[FEM_SolverCalculixCxxtools/pl|solvera CalculiX]], jest teraz również tworzona [[FEM_PostPipelineFromResult/pl|prezentacja graficzna]] wyników w celu wizualizacji wyników. [https://github.com/FreeCAD/FreeCAD/pull/8525 Pull request #8525] oraz [https://github.com/FreeCAD/FreeCAD/pull/8903 Pull request #8903]
* Możliwe jest teraz wykonanie [[FEM_SolverElmer_SolverSettings/pl#Przechodzenie_w_czasie_(analizy_przejściowe)|analizy przejściowej]] podczas korzystania z [[Image:FEM_SolverElmer.svg|32px]] [[FEM_SolverElmer/pl|solvera Elmer]]. [https://github.com/FreeCAD/FreeCAD/pull/9056 Pull request #9056]
* Dodano narzędzie [[Image:FEM_ConstraintInitialPressure.svg|24px]] [[FEM_ConstraintInitialPressure/pl|Ciśnienie początkowe]], aby ustawić początkowe ciśnienie wewnętrzne płynów. [https://github.com/FreeCAD/FreeCAD/pull/7364 Pull request #7364]
* Dodano narzędzie [[Image:FEM_ConstraintCurrentDensity.svg|24px]] [[FEM_ConstraintCurrentDensity/pl|Zdefiniuj gęstość prądu]] aby ustawić aktualne gęstości dla brył i ścian. [https://github.com/FreeCAD/FreeCAD/pull/8348 Pull request #8348]
* Dodano narzędzie [[Image:FEM_ConstraintMagnetization.svg|24px]] [[FEM_ConstraintMagnetization/pl|Warunek magnetyzacji]] aby ustawić magnetyzację dla ciał i ścian. [https://github.com/FreeCAD/FreeCAD/pull/8393 Pull request #8393]
* [[Image:FEM_ConstraintFlowVelocity.svg|24px]] [[FEM_ConstraintFlowVelocity/pl|Ograniczenie prędkości przepływu]] i [[Image:FEM_ConstraintInitialFlowVelocity.svg|24px]] [[FEM_ConstraintInitialFlowVelocity/pl|Ograniczenie początkowej prędkości przepływu]] zostały całkowicie przepisane. Teraz możliwe jest również określenie prędkości za pomocą wzoru matematycznego ''(w celu zdefiniowania profilu prędkości)''. [https://github.com/FreeCAD/FreeCAD/pull/8963 Pull request #8963] i [https://github.com/FreeCAD/FreeCAD/pull/8964 Pull request #8964]</br>''' Uwaga:''' To przełomowa zmiana. Analizy z istniejącymi ograniczeniami prędkości przepływu i początkowej prędkości przepływu nie będą już działać. Musisz utworzyć nowe ograniczenia prędkości przepływu w analizie, aby istniejące analizy działały.</br>'''Zauważ również:''' aż do FreeCAD 0.21 wyniki solwera przepływu były błędne ''(gęstość i lepkość płynu były współczynnikiem 1000 za wysoko)''. Dlatego konieczne odtworzenie ograniczenia prędkości również zapewnia, że wyniki będą poprawne.
* Narzędzia [[Image:FEM_ConstraintFlowVelocity.svg|24px]] [[FEM_ConstraintFlowVelocity/pl|Zdefiniuj prędkość przepływu]] oraz [[Image:FEM_ConstraintInitialFlowVelocity.svg|24px]] [[FEM_ConstraintInitialFlowVelocity/pl|Zdefiniuj warunek początkowy prędkości przepływu]] zostały całkowicie przepisane. Obecnie możliwe jest również określenie prędkości za pomocą formuły matematycznej ''(w celu zdefiniowania profilu prędkości)''. [https://github.com/FreeCAD/FreeCAD/pull/8963 Pull request #8963] oraz [https://github.com/FreeCAD/FreeCAD/pull/8964 Pull request #8964]
   Uwaga: Jest to zmiana przełomowa. Analizy z istniejącymi wiązaniami prędkości przepływu i początkowej prędkości przepływu nie będą już działać. Musisz utworzyć nowe wiązania prędkości przepływu w analizie, aby istniejące analizy działały.
   Uwaga: do wersji FreeCAD 0.20.3 wyniki solwera przepływowego były błędne ''(gęstość płynu i lepkość były o czynnik 1000 za wysokie)''. Dlatego konieczne odtworzenie ograniczenia prędkości zapewnia, że wyniki będą poprawne.
* Możliwe jest teraz definiowanie [[Image:FEM_ConstraintDisplacement.svg|24px]] [[FEM_ConstraintDisplacement/pl|przemieszczenia]] jako równania ''(przemieszczenie według aktualnego czasu solvera)''.
* Narzędzie [[Image:FEM_ConstraintBodyHeatSource.svg|24px]] [[FEM_ConstraintBodyHeatSource/pl|Objętościowe źródło ciepła]] ma teraz panel zadań i możliwe jest ustawienie ciepła dla kilku ciał lub użycie kilku wiązań dla różnych ciał w jednej analizie. [https://github.com/FreeCAD/FreeCAD/pull/7367 Pull request #7367]
* [[Image:FEM_ConstraintSpring.svg|24px]] [[FEM_ConstraintSpring/pl|Wiązanie sprężynowe]] nie było używane przez żaden solwer. Teraz może być używane przez [[FEM_SolverElmer/pl|solwer Elmer]] poprzez równania [[FEM_EquationDeformation/pl|deformacji]] i [[FEM_EquationElasticity/pl|elastyczności]]. [https://github.com/FreeCAD/FreeCAD/pull/9005 Pull request #9005]
* Została dodana funkcja cięcia siatki wynikowej [[Image:FEM_PostCreateFunctionCylinder.svg|24px]] [[FEM_PostCreateFunctionCylinder/pl|Filtr funkcyjny walca]]. [https://github.com/FreeCAD/FreeCAD/pull/8735 Pull request #8735]
* Została dodana funkcja cięcia siatki wynikowej [[Image:FEM_PostCreateFunctionBox.svg|24px]] [[FEM_PostCreateFunctionBox/pl|Filtr funkcyjny sześcianu]]. [https://github.com/FreeCAD/FreeCAD/pull/8825 Pull request #8825]
* Teraz można otwierać ''(i w ten sposób wizualizować)'' pliki *.pvtu ''(partycjonowane niestrukturalne dane siatki VTK)''. Plik *.pvtu jest również wynikiem symulacji [[FEM_SolverElmer/pl|Elmer]], w której zastosowano więcej niż jeden rdzeń procesora. [https://github.com/FreeCAD/FreeCAD/pull/7159 Pull request #7159]
* Critical Strain Ratio został dodany do potoku wyników VTK. Daje wskazanie rozerwania ciągliwego dla materiałów z obiektem „MaterialMechanicalNonlinear”. [https://github.com/FreeCAD/FreeCAD/pull/7467 Pull request #7467]
* Narzędzie [[Image:FEM_FemMesh2Mesh.svg|24px]] [[FEM_FemMesh2Mesh/pl|Siatka MES na obiekt środowiska Siatka]] posiada nowy parametr ''Skala'' umożliwiający określenie skali deformowanej siatki przy użyciu środowiska Python. [https://forum.freecadweb.org/viewtopic.php?f=18&t=71936 wątek na Forum] oraz [https://github.com/FreeCAD/FreeCAD/pull/7715 Pull request #7715]
* [[FEM_Preferences/pl|Preferencje]] mają nową opcję definiowania, który solver powinien być automatycznie dodawany podczas tworzenia nowej analizy.
* Ulepszenia użyteczności:
** Jeśli podczas wczytywania pliku FreeCAD zawierającego analizę znajdujesz się w oknie środowisku pracy MES, analiza zostaje aktywowana automatycznie ''(masz natychmiastowy dostęp do wszystkich przycisków paska narzędzi FEM)''.
** Na pasku narzędziowym znajdują się tylko przyciski dla solwerów zainstalowanych w Twoim systemie. Niedostępne solwery nie są już wyświetlane.
* Poprzez stronę [[FEM_Examples/pl|Przykłady dla środowiska pracy MES]] dostępne są nowe pliki przykładów dla następujących równań: [[FEM_EquationDeformation/pl|Równanie deformacji]], [[FEM_EquationFlow/pl|Równanie przepływu]], [[FEM_EquationFlux/pl|Równanie strumienia]], [[FEM_EquationHeat/pl|Równanie ciepła]], [[FEM_EquationMagnetodynamic/pl|Równanie magnetodynamiczne]] oraz [[FEM_EquationMagnetodynamic2D/pl|Równanie magnetodynamiczne 2D]]. Pull requests [https://github.com/FreeCAD/FreeCAD/pull/8550 #8550], [https://github.com/FreeCAD/FreeCAD/pull/8569 #8569], [https://github.com/FreeCAD/FreeCAD/pull/8579 #8579], [https://github.com/FreeCAD/FreeCAD/pull/8597 #8597] i [https://github.com/FreeCAD/FreeCAD/pull/8630 #8630] oraz [https://github.com/FreeCAD/FreeCAD/pull/9004 #9004]
* Nowa karta materiału dla dwutlenku węgla i stopu tytanu. [https://github.com/FreeCAD/FreeCAD/pull/8332 Pull request #8332] oraz [https://github.com/FreeCAD/FreeCAD/pull/8636 Pull request #8636]