All translations

Enter a message name below to show all available translations.

Message

Found 3 translations.

NameCurrent message text
 h English (en){| cellpadding=5
| [[File:Femconcrete_Wall_3D_rx_PSS.png|384px]]
| After half a year in development and testing the "femconcrete" branch was added to the FEM Workbench. This provides tools to estimate the level of reinforcement required in a concrete structure to prevent brittle failure under tension or shear. In essence, it is a post processing routine for the CalculiX solver, which calculates the principal tensile stresses in the concrete from an elastic analysis and uses those to determine the minimum reinforcement in the three coordinate directions required to prevent failure.
[https://forum.freecadweb.org/viewtopic.php?f=18&t=33106 Forum discussion], [https://github.com/FreeCAD/FreeCAD/pull/2267 pull request #2267]; [[Analysis_of_reinforced_concrete_with_FEM|Analysis of reinforced concrete with FEM]] (tutorial).
 h français (fr){| cellpadding=5
| [[File:Femconcrete_Wall_3D_rx_PSS.png|384px]]
| Après six mois de développement et de test, la branche "femconcrete" a été ajoutée au FEM Workbench. Cela fournit des outils pour estimer le niveau de ferraillage requis dans une structure en béton pour éviter une rupture fragile sous tension ou cisaillement. Il s'agit essentiellement d'une routine de post-traitement pour le solveur CalculiX, qui calcule les principales contraintes de traction dans le béton à partir d'une analyse élastique et les utilise pour déterminer le ferraillage minimum dans les trois directions de coordonnées requises pour éviter la rupture.
[https://forum.freecadweb.org/viewtopic.php?f=18&t=33106 Discussion sur le forum], [https://github.com/FreeCAD/FreeCAD/pull/2267 pull request #2267] ; [[Analysis_of_reinforced_concrete_with_FEM/fr|Analyse du béton armé avec FEM]] (tutoriel).
 h polski (pl){| cellpadding=5
| [[File:Femconcrete_Wall_3D_rx_PSS.png|384px]]
| Po pół roku pracy nad rozwojem i testami gałąź '''femconcrete''' została dodana do FEM Workbench. Dostarcza to narzędzi do oszacowania poziomu zbrojenia wymaganego w konstrukcji betonowej, aby zapobiec wystąpieniu pęknięć przy rozciąganiu lub ścinaniu. Zasadniczo jest to rutynowa procedura postprocesowa dla solwera CalculiX, który oblicza główne naprężenia rozciągające w betonie na podstawie analizy sprężystej i wykorzystuje je do określenia minimalnego zbrojenia w trzech kierunkach współrzędnych wymaganych do zapobiegania zniszczeniom.
[https://forum.freecadweb.org/viewtopic.php?f=18&t=33106 dyskusja na forum], [https://github.com/FreeCAD/FreeCAD/pull/2267 pull request #2267], [[Analysis_of_reinforced_concrete_with_FEM|Analysis of reinforced concrete with FEM]] ''(poradnik)''.