Croquizador RestringirRadius

From FreeCAD Documentation
Revision as of 08:09, 12 October 2020 by Maker (talk | contribs) (Replaced content with "==Utilización==")

Constraint Radius

Ubicación en el Menú
Croquizador → Restricciones del Croquizador → Radio
Entornos de trabajo
Croquizador, Diseño de Piezas
Atajo de teclado por defecto
Ninguno
Introducido en versión
-
Ver también
Distancia, Horizontal, Vertical

Descripción

Esta restricción restringe el valor del radio de una circunferencia o un arco a un valor específico. Sólo se puede restringir un arco o una circunferencia de cada vez.

Utilización

  1. Pick one or more circles or arcs.
  2. Press the Constrain radius button.
  3. A pop up dialog opens to edit or confirm the value. Press OK to validate. In case multiple circles/arcs were selected, all constraints will adopt this value. Edit their separate values by double-clicking on the dimension label in the 3D view; or in the Constraints list, double-click on the constraint or right-click and select Change value.
  4. Optionally the dimension label and line can be moved and rotated in the 3D view by clicking on the value and dragging while keeping the left mouse button pressed.

Note: the constraint tool can also be started with no prior selection. By default the command will be in continue mode to create new constraints; press the right mouse button or Esc once to quit the command.