Szkicownik: Przytnij krawędź

From FreeCAD Documentation
Revision as of 19:24, 22 July 2020 by Kaktus (talk | contribs) (Created page with "==Ograniczenia==")

Szkicownik: Przytnij krawędź

Lokalizacja w menu
Sketch → Elementy geometryczne szkicownika → Przytnij krawędź
Środowisko pracy
Sketcher
Domyślny skrót
brak
Wprowadzono w wersji
0.12
Zobacz także
Sketcher Extend edge

Opis

This tool trims an edge to the nearest overlapping edge.

Użycie

  1. Press the trim edge button. The mouse pointer turns into a white cross with a red trim symbol.
  2. Click on the edge that you want to trim.
  3. The line segment will be trimmed to the nearest overlapping line(s). If there are other sketch elements on both sides of the clicked position, the clicked piece is cut out.
  4. Pressing ESC or pressing the right mouse button will terminate the function.

Ograniczenia

  • Arcs of hyperbola, arcs of parabola and B-splines cannot be trimmed at this time.