Taslak Bezier eğrisi
Bezier eğrisi |
Menü konumu |
---|
Taslak → Bezier eğrisi |
Tezgahlar |
Taslak, Yapı |
Varsayılan kısayol |
B Z |
Versiyonda tanıtıldı |
- |
Ayrıca bkz |
Hiçbiri |
Tanım
Bezier eğrisi aracı, mevcut Çalışma düzlemi ile birkaç noktadan Bezier Eğrisi (veya parça parça Bezier Eğrisi) oluşturur. Görevler sekmesinde önceden ayarlanmış olan Çizgi stilini alır.
The BezCurve tool curve uses control points to define the direction of the curve; on the other hand the Draft BSpline tool specifies the exact points through which the curve will go. To create exact circular or elliptical curves, use Draft Arc and Draft Ellipse.
Bezier curve defined by multiple control points
- Invoke the Draft BezCurve command several ways:
- Press the Draft BezCurve button in Draft toolbar
- Press the B then Z keyboard keys
- Use the Draft → Bezier tools → BezCurve entry in the Draft menu
- Click a first point on the 3D view, or type a coordinate and press the add point button.
- Click additional points on the 3D view, or type a coordinate and press the add point button.
- Press Esc or the Close button, or double-click the last point to complete the edition.
Nesne, tek bir Bezier derece eğrisi olarak oluşturulur (nokta sayısı - 1). Bu, Özellikler kullanılarak yaratıldıktan sonra belirli bir dereceye kadar parçalı bir Bezier Eğrisi olarak değiştirilebilir. Bezier Eğrileri, Düzenle kullanılarak düzenlenebilir.
The curve can be edited by double clicking on the element in the tree view, or by pressing the Draft Edit button. Then you can move the points to a new position, or click add point or remove point and then click on the curve to add or remove points. You can also change the constraint type of each point.
Kontrol Düğümleri
Parçalı bir Bezier Eğrisi'ndeki segment bitiş noktaları, bitişik kontrol noktalarının bitiş noktasındaki segmentlere teğet veya simetrik olacak şekilde sınırlandırılabilir. Bu, Düzenle kullanılarak nesne oluşturulmasından sonra yapılır.
The segment endpoints can be constrained such that adjacent control points are tangent or symmetric to the segments at the endpoint. First, start editing the curve, then pick one of the tools and then pick a point. Click again on the tool to deactivate it, so you can move the point.
- sharp remove constraints on the points so the curve can have sharp corners.
- tangent force adjacent control points to be tangent.
- symmetric force adjacent control points to be tangent and equidistant.
Sınırlamalar
- Bu araç FreeCAD 0.14 versiyonundan önce kullanılamaz
- Nokta Özelliği henüz özellikler listesinde görünmüyor.
- OpenCascade, derece > 25 sahip Bezier Eğrisi'ni desteklemiyor. Bu pratikte bir sorun olmamalıdır.
- Bezier eğrisi düğmesine basın veya B ardından Z tuşlarına basın.
- 3D görünümünde bir ilk noktaya tıklayın veya bir koordinat yazın
- 3D görünümünde ek noktaya tıklayın veya bir koordinat yazın
- F veya C tuşuna basın veya son noktayı çift tıklayın veya eğriyi bitirmek ve kapatmak için ilk noktayı tıklayın.
Seçenekler
- Spline'ı bitirmek için F veya Bitir düğmesine basın
- C veya Kapat düğmesine basın veya ilk noktaya tıklayın spline'ı bitirin, ancak son nokta ile birincinin arasına son bir parça ekleyerek kapatın.
- Verilen eksendeki bir sonraki noktayı sınırlamak için bir noktadan sonra X, Y veya Z tuşlarına basın.
- Koordinatları manuel olarak girmek için sayıları girin, ardından her bir X, Y ve Z bileşeni arasında ENTER tuşuna basın.
- R tuşuna basınız veya Göreceli düğmesini işaretlemek / işaretini kaldırmak için onay kutusuna tıklayınız. Göreceli mod açıksa, bir sonraki noktanın koordinatları da öncekine göredir. Olmazsa, mutlaktırlar, (0,0,0) başlangıç noktasından alınırlar.
- T tuşuna basınız veya Devam et düğmesini işaretlemek / işaretini kaldırmak için onay kutusuna tıklayınız. Devam modu açıksa, Bezier eğrisi aracı, bitirdikten veya kapattıktan sonra yeniden başlatılır ve Bezier eğrisi düğmesine tekrar basmadan bir tane daha çizmenize olanak sağlar.
- snapping noktasını mesafeden bağımsız olarak, noktanızı en yakın anlık konuma zorlamak için çizim yaparken CTRL tuşuna basın.
- Bir sonraki noktanızı yatay veya dikey olarak son noktaya göre constrain çizerken SHIFT tuşuna basın.
- Mevcut segmentleri kaldırmak ve spline'ı en sondan başlatmak için W tuşuna basınız veya Uzat tuşuna basınız. puan.
- Son noktayı geri almak için CTRL + Z tuşuna basın veya Geri al tuşuna basın .
- Geçerli Bezier eğrisi komutunu iptal etmek için ESC veya İptal düğmesine basın.
Özellikler
Data
- VeriDegree: specifies the degree of the Bezier curve or the individual segments.
- VeriClosed: specifies if the curve is closed or not. If the curve is initially open, this value is
false
; setting it totrue
will draw a segment to close the curve. If the curve is initially closed, this value istrue
; setting it tofalse
will remove the last segment, and make the curve open. - VeriMake Face: specifies if the curve makes a face or not. If it is
true
a face is created, otherwise only the perimeter is considered part of the object. This property only works if VeriClosed istrue
.
- Note: do not set VeriMake Face to
true
if the curve intersects itself, as it won't create a proper face.
- VeriContinuity: (read-only) when the curve is closed, indicates the continuity of the curve
[0]
, or[0,0]
. Otherwise it's[]
.
View
- GörünümArrow Size: specifies the size of the symbol displayed at the end of the curve.
- GörünümArrow Type: specifies the type of symbol displayed at the end of the curve, which can be dot, circle, arrow, and tick.
- GörünümEnd Arrow: specifies whether to show a symbol at the last point of the curve, so it can be used as an annotation line.
- GörünümPattern: specifies a Draft Pattern with which to fill the face of the closed curve. This property only works if VeriMake Face is
true
, and if GörünümDisplay Mode is "Flat Lines". - GörünümPattern Size: specifies the size of the Draft Pattern.
Betik
Betik
Bezier eğrisi aracı, aşağıdaki işlevi kullanarak makrolar ve python konsolundan kullanılabilir:
BezCurve = makeBezCurve(pointslist, closed=False, placement=None, face=None, support=None, degree=None)
BezCurve = makeBezCurve(Part.Wire, closed=False, placement=None, face=None, support=None, degree=None)
- Verilen vektör listesinden bir Bezier eğrisi nesnesi oluşturun. Bir nokta listesi yerine, bir Parça Teli de geçebilirsiniz.
Example:
import FreeCAD, Draft
p1 = FreeCAD.Vector(0, 0, 0)
p2 = FreeCAD.Vector(1000, 1000, 0)
p3 = FreeCAD.Vector(2000, 0, 0)
p4 = FreeCAD.Vector(1500, -2000, 0)
BezCurve1 = Draft.makeBezCurve([p1, p2, p3, p4], closed=True)
BezCurve2 = Draft.makeBezCurve([p4, 1.3*p2, p1, 4.1*p3], closed=True)
BezCurve3 = Draft.makeBezCurve([1.7*p3, 1.5*p4, 2.1*p2, p1], closed=True)
- Drafting: Line, Polyline, Fillet, Arc, Arc by 3 points, Circle, Ellipse, Rectangle, Polygon, B-spline, Cubic Bézier curve, Bézier curve, Point, Facebinder, ShapeString, Hatch
- Annotation: Text, Dimension, Label, Annotation styles, Annotation scale
- Modification: Move, Rotate, Scale, Mirror, Offset, Trimex, Stretch, Clone, Array, Polar array, Circular array, Path array, Path link array, Point array, Point link array, Edit, Subelement highlight, Join, Split, Upgrade, Downgrade, Wire to B-spline, Draft to sketch, Set slope, Flip dimension, Shape 2D view
- Draft Tray: Select plane, Set style, Toggle construction mode, AutoGroup
- Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid
- Miscellaneous: Apply current style, Layer, Manage layers, Add a new named group, Move to group, Select group, Add to construction group, Toggle normal/wireframe display, Create working plane proxy, Heal, Show snap toolbar
- Additional: Constraining, Pattern, Preferences, Import Export Preferences, DXF/DWG, SVG, OCA, DAT
- Context menu:
- Layer container: Merge layer duplicates, Add new layer
- Layer: Activate this layer, Select layer contents
- Text: Open hyperlinks
- Wire: Flatten
- Working plane proxy: Write camera position, Write objects state
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub