Sketcher: Tundere/Trimming

From FreeCAD Documentation
Revision as of 03:54, 12 November 2018 by Normandc (talk | contribs) (Replaced content with "==Utilizare==")

Sketcher Taie marginea

poziția meniului
Sketch → Geometria schitei → Taie marginea
Ateliere
Sketcher
scurtătură
nici unul
Prezentat în versiune
0.12
A se vedea, de asemenea,
Prelungirea muchiei

Descriere

Acest instrument taie/tunde o linie sau un cerc la cea mai apropiată suprapunere de linii.

Utilizare

  1. Press the trim edge button. The mouse pointer turns into a white cross with a red trim symbol.
  2. Click on the edge that you want to trim.
  3. The line segment will be trimmed to the nearest overlapping line(s). If there are other sketch elements on both sides of the clicked position, the clicked piece is cut out.
  4. Pressing ESC or pressing the right mouse button will terminate the function.

Limitations

  • Arcs of hyperbola, arcs of parabola and B-splines cannot be trimmed at this time.