PartDesign: Migrare

From FreeCAD Documentation
Revision as of 12:54, 27 September 2018 by Luc (talk | contribs)

Template:GuiCommandNoIcon

Descriere

Atelierul PartDesign în FreeCAD v0.17 introduce noi instrumente și elemente care și elemente care nu sunt recunoscute de versiunile mai vechi ale FreeCAD (0.16 and older). Documentele FreeCAD create în versiuni mai vechi pot fi deschise și editate. Pentru a beneficia de noile caracteristici, acestea trebuie migrate prin intermediul meniului PartDesign → Migrate.

introduced in version 0.17

Cum se folosește

  1. Deschide un document FreeCAD (≤ 0.16).
  2. Comutați pe atelierul PartDesign.
  3. Mergeți la meniu Part DesignMigrate .
  4. Dacă funcționează migrarea, a Part container va fi creat care va deține unul sau mai multe Bodies, fiecare gazduind un lanț de caracteristici.

Limite

  • Before starting the migration process, check if the model was built with automatic refine options enabled (in Edit → Preferences → Part design → General), and set your preferences accordingly. This can be easily determined by successively toggling the visibility of the features in the Model tree. If no residual edges are left between features such as Pads and Pockets, the automatic refine options were disabled.
  • If a document to migrate only contains sketches and PartDesign features, the migration process may likely succeed. Some features such as chamfers and fillets may require rebuilding.
  • If the document to migrate has a mixed Part/Part Design/Draft work flow, the conversion will most likely fail or at best produce unexpected results, and will need to be migrated manually.