Верстак Draft
Верстак Draft позволяет быстро начертить в текущем документе простые двумерные объекты и предлагает некоторые инструменты для их модификации. Некоторые из этих инструментов так же работают на других объектах FreeCAD, сделанных не на верстаке Draft. На верстаке имеется полнофункциональная система привязки и некоторые утилиты для управления объектами и установками.
Drawing objects
These are tools for creating objects.
Line: Draws a line segment between 2 points
Wire: Draws a line made of multiple line segments (polyline)
Circle: Draws a circle from center and radius
Arc: Draws an arc segment from center, radius, start angle and end angle
Ellipse: Draws an ellipse from two corner points
Polygon: Draws a regular polygon from a center and a radius
Rectangle: Draws a rectangle from 2 opposite points
Text: Draws a multi-line text annotation
Dimension: Draws a dimension annotation
BSpline: Draws a B-Spline from a series of points
Point: Inserts a point object
ShapeString: The ShapeString tool inserts a compound shape representing a text string at a given point in the current document
Facebinder: Creates a new object from selected faces on existing objects
Bezier Curve: Draws a Bezier curve from a series of points
Label: Places a label with an arrow pointing to a selected element introduced in version 0.17
Modifying objects
These are tools for modifying existing objects. They work on selected objects, but if no object is selected, you will be invited to select one.
Move: Moves object(s) from one location to another
Rotate: Rotates object(s) from a start angle to an end angle
Offset: Moves segments of an object about a certain distance
Trim/Extend (Trimex): Trims or extends an object
Upgrade: Joins objects into a higher-level object
Downgrade: Explodes objects into lower-level objects
Scale: Scales selected object(s) around a base point
Drawing: Writes selected objects to a Drawing sheet
Edit: Edits a selected object
Wire to BSpline: Converts a wire to a BSpline and vice-versa
Add point: Adds a point to a wire or BSpline
Delete point: Deletes a point from a wire or BSpline
Shape 2D View: Creates a 2D object which is a flattened 2D view of another 3D object
Draft to Sketch: Converts a Draft object to Sketch and vice-versa
Array: Creates a polar or rectangular array from selected objects
Path Array: Creates an array of objects by placing the copies along a path
Clone: Clones the selected objects
Mirror: Mirrors the selected objects
Stretch: Stretches the selected objects introduced in version 0.17
Utility tools
Additional tools available via right-click context menu, depending on the selected objects.
Set working plane: Sets a working plane from a standard view or a selected face
Finish line: Ends the drawing of the current wire or bspline, without closing it
Close line: Ends the drawing of the current wire or bspline, and closes it
Undo line: Undoes the last segment of a line
Toggle construction mode: Toggles the Draft construction mode on/off
Toggle continue mode: Toggles the Draft continue mode on/off
- File:Draft ApplyStyle.png Apply style: Applies the current style and color to selected objects
Toggle display mode: Switches the display mode of selected objects between "flat lines" and "wireframe"
Add to group: Quickly adds selected objects to an existing group
Select group contents: Selects the contents of a selected group
- File:Draft ToggleSnap.png Toggle snap: Toggles object snapping on/off
- File:Draft ToggleGrid.png Toggle grid: Toggles the grid on/off
- File:Draft ShowSnapBar.png Show snap bar: Shows/hides the snapping toolbar
Heal: Heals problematic Draft objects found in very old files
Flip Dimension: Flips the orientation of the text of a dimension
- File:Draft VisGroup.png VisGroup: Creates a VisGroup in the current document
- File:Draft Slope.png Slope: Changes the slope of selected Lines or Wires introduced in version 0.17
AutoGroup: Automatically place new objects in a given group introduced in version 0.17
- File:Draft SetWorkingPlaneProxy.png Set Working Plane Proxy: Add a proxy object in the document to store a Working Plane position introduced in version 0.17
Add to Construction group: Add selected objects to the Construction group introduced in version 0.17
Preferences
Preferences...: Preferences disposable in Draft Tools.
Форматы файлов
Верстак Draft позволяет FreeCAD импортировать и экспортировать следующие форматы файлов:
Preference ... Import Export
- Autodesk .DXF: импорт и экспорт файлов DXF (Drawing Exchange Format), созданных в двумерных приложениях САПР
- SVG (геометрия): импорт и экспорт файлов SVG (Scalable Vector Graphics), созданных в приложениях векторной графики
- формат Open Cad .OCA: импорт и экспорт файлов OCA/GCAD, потенциально нового формата файлов открытых САПР
- формат Airfoil Data .DAT: импорт файлов DAT, описывающих профили Airfoil
- Autodesk .DWG: импорт и экспорт файлов DWG через экспортёр DXF при установленной утилите Teigha Converter
- FreeCAD and DWG Import: импорт и экспорт файлов DWG
- FreeCAD and DXF Import: импорт и экспорт файлов DXF
Дополнительные возможности
- Привязка: позволяет разместить новые точки на специальных частях существующих объектов
- Геометрические ограничения: позволяет разместить новые точки горизонтально или вертикально относительно предыдущих точек
- Работа с координатами вручную: позволяет вводить координаты вручную, вместо указания их на экране
- Рабочая плоскость: позволяет задать плоскость в трёхмерном пространстве, где будут проводиться операции с плоскими фигурами
Сценарии
Модуль Draft предоставляет полный набор API, что делает возможным использование его функций в сценариях и макросах.