Draft: Aggancia Punto Medio
This documentation is not finished. Please help and contribute documentation.
GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.
See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.
|
Posizione nel menu |
---|
Draft → Snap → Punto centrale |
Ambiente |
Draft, Arch |
Avvio veloce |
Nessuno |
Introdotto nella versione |
- |
Vedere anche |
Nessuno |
Descrizione
Use
- Make sure snap mode is turned on
- Choose element to be inserted into the FreeCAD-document
- Move cursor near the midpoint of the element you wish to attach your element to
- below on the right side of the cursor the symbol of the snap mode will appear
- click to attach your element to the selected endpoint of target element
Notes
Snap mode can be used with
- sketcher elements (lines, arcs)
- draft elements (DWires, Lines, Arcs)
- edges of shapes
- edges of solids
Clicking on the snap-mode icon will toggle the snap mode on/off.