TechDraw "Добавить осевую линию к граням"

From FreeCAD Documentation
Revision as of 08:43, 29 May 2023 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
Other languages:

Добавить осевую линию к граням

Системное название
TechDraw_FaceCenterLine
Расположение в меню
TechDraw → Добавить Линии → Add Centerline to Face(s)
Верстаки
TechDraw
Быстрые клавиши
Нет
Представлено в версии
0.19
См. также
Добавить вспомогательную вершину, Добавить осевую линию между 2 линиями, Добавить осевую линию между 2 точками, Удалить вспомогательный объект

Описание

The TechDraw FaceCenterLine tool adds a centerline to selected faces.

Centerline added to face

Применение

  1. Select one or more Faces in a View.
  2. Press the Add Centerline to Face(s) button
  3. A dialog will open where you can specify attributes of the new centerline.
  4. A centerline will be added at the midpoint of the bounding box of the selected Face(s).

To delete a Centerline, select it and use the toolbar button Remove Cosmetic Object.

Правка Осевой Линии

Any of the centerline command buttons ( Add Centerline to Face(s), Add Centerline between 2 Lines, Add Centerline between 2 Points) can be used to edit any centerline.

  1. Select a centerline.
  2. Press any centerline command button.
  3. A dialog will open where you can change attributes of the centerline.
  4. Press OK to see your changes.

Свойства

Centerlines have no properties of their own, as they are no document objects. They have attributes that can be changed in the centerline edit dialog.

  1. Mode (radio buttons):
    • Vertical: Forces a centerline vertical
    • Horizontal: Forces a centerline horizontal
    • Aligned: This option is not possible for centerline to faces
  2. Shift Horiz: Moves the centerline left or right of its normal position
  3. Shift Vert: Moves the centerline up or down from its normal position
  4. Rotate: Rotates the centerline around its center (degrees. + counterclockwise, - clockwise)
  5. Extend: Makes the centerline longer by this amount
  6. Color: Color of centerline
  7. Weight: Thickness of the centerline
  8. Style: Continuous, Dash, Dot, DashDot, DashDotDot

Программирование

См. так же: TechDraw API и Основы составления скриптов FreeCAD.

Centerlines are not accessible from macros or the Python console at this time.

Примечания

  • FaceCenterLine will eventually replace two View properties:
    • ВидHorizCenterLine: Show a horizontal centerline through view.
    • ВидVertCenterLine: Show a vertical centerline through view.