Std: Synchronizuj położenie w widoku drzewa

From FreeCAD Documentation
Revision as of 13:40, 1 September 2022 by Kaktus (talk | contribs) (Created page with "==Opis==")

Std: Synchronizuj położenie w widoku drzewa

Lokalizacja w menu
Widok → Akcje widoku drzewa → Synchronizuj położenie
Środowisko pracy
wszystkie
Domyślny skrót
T 3
Wprowadzono w wersji
0.19
Zobacz także
brak

Opis

The Std TreeSyncPlacement command toggles the Tree view SyncPlacement mode. If this mode is on, the DANEPlacement of objects is automatically adjusted when they are dragged and dropped from one container into another container with a different coordinate system, preserving their placement relative to the global coordinate system.

Usage

  1. There are several ways to invoke the command:
    • Click on the black down arrow to the right of the button and select the Sync placement option from the flyout. Note: the button image will change depending on the selected option.
    • Select the View → TreeView actions → Sync placement option from the menu.
    • Use the keyboard shortcut: T then 3.

Preferences

The Tree view SyncPlacement mode is stored: Tools → Edit parameters... → BaseApp → Preferences → TreeView → SyncPlacement. It is a boolean value, the default is false.