FreeCAD MitErwartungenUmgehen
Zweck
Diese Wiki-Seite ist für neue FreeCAD-Nutzer gedacht, die von anderen CAD/CAM-Anwendungen kommen.
FreeCAD ist FreeCAD
Wenn man FreeCAD als Ersatz für ein anderes CAD-Programm einsetzen möchte, wird man sich fragen, warum FreeCAD so anders ist. Die einfache Antwort ist, dass FreeCAD eben so ist. Es ist nicht das Ziel Anwendung X, Y oder Z nachzubauen, es hat eigene Wege Dinge zu erledigen, eigene Arbeitsabläufe, seine eigene Geschichte.
Q: Heißt das, dass FreeCAD-Entwickler glauben, dass FreeCAD perfekt ist, so wie es ist??
A: Nein, ganz bestimmt nicht.
Es gibt Fehler in FreeCAD die behoben werden müssen. Da wir ein FOSS-Projekt sind, können wir offen darüber reden aber auch über Neuerungen, die Programmierer einführen wollen. Und wenn man nach einer Ergänzung fragt, werde Entwickler diese wahrscheinlich berücksichtigen. Aber man sollte bitte nicht erwarten, dass sie alles stehen und liegen lassen, was sie gerade tun. Oder dass sie dafür ihren bezahlten Job opfern; die meisten arbeiten hier nach wie vor freiwillig. Es ist fertig, wenn es fertig ist ist das FreeCAD-Motto.
Was kann ich erwarten?
Im Kern ist FreeCAD ein parametrischer Modellierer. Sein Konzept basiert auf der Verwendung von Arbeitsbereichen, wobei jeder Arbeitsbereich für bestimmte Aufgaben und Funktionen verantwortlich ist. Als solches kann es für viele Zwecke eingesetzt werden. Es wird aktiv der Produktion eingesetzt und ist ziemlich stabil. Aber wie jedes andere CAD-Programm auch ist FreeCAD nicht zu 100% stabil.
Wenn man von einem anderen CAD-Programm kommt, muss man sicherlich seine Arbeitsabläufe anpassen, einen Workaround anwenden oder ein Makro benutzen, aber in vielen Fällen wird man erreichen, was man möchte. Und wenn man Hilfe braucht: Wir haben ein sehr aktives und hilfsbereites Forum. Und unter den Mitgliedern im Forum sind auch viele (ehemalige) Anwender anderer CAD-Programme. Es gibt keinen Grund zu zögern, diese Quelle anzuzapfen.
Kann FreeCAD für 2D-Zeichnungserstellung verwendet werden?
Kann FreeCAD für nicht parametrisches Modellieren verwendet werden?
Can FreeCAD be used for mesh modeling?
How can I contribute?
There are many ways: you can make a donation, help with forum questions, or write documentation or code. See Help FreeCAD.
What FreeCAD is not
Non Parametric
- FreeCAD can be used non-parametrically. But the user needs to know how.
- Blender is the ideal free libre opensource tool for non-parametric design.
Mesh Modeler
- Again, Blender is the more appropriate application for mesh modeling.
Common Perspectives
FreeCAD has not reached v1.0
FreeCAD is not stable
This is true to of any of many CAD applications. FreeCAD suffers from this as well. Although the community works to address catastrophic crashes quickly, users are encouraged to employ a workflow in which they save their work often and utilize the backup features (available in preferences) to recover or roll-back from problematic issues. An important point here to consider is that many users aren't always using the most up to date version of FreeCAD and end up complaining of deprecated or already addressed instability problems. FreeCAD also has a very long release cycle and in the past has not backported fixes due to time and 3rd-party dependency complexity. In short, many bugs get fixed in the development version and so users need to make the unorthodox decision of running a development version of FreeCAD instead of the 'stable'.
FreeCAD UI is ugly
- At its core, this is relegated to 'Eye of the beholder' (subjective) perspective. FreeCAD has been around a very long time, its dedicated users have grown familiar with the user interface.
- The topic of changes to UI/UX is very contentious. Changes to the UI/UX require proof of concepts, popularity in the community, and effectiveness to eventually make it in to the mainline FreeCAD code. This takes time and diplomacy.
- Is it really? Thanks to customization possibilities (as of v0.20) there is an ability to customize the UI (see Preference Packs). At some point very soon, FreeCAD will be provide a comprehensive flexibility to customize its UI, something other CAD packages would not be able to boast.
Realities
OpenCascade Kernel
OpenCascade (OCC/OCCT) is a core external CAD kernel dependency that FreeCAD is utterly dependent on. There are many open 'upstream' bugs that the FreeCAD community has identified and track regarding OCC. We track them via the:
- bugtracker
- forum thread called OCC Bugs in the Bugtracker
Qt
Links
- Discussion: FreeCAD is not ready for 1.0 (forum thread)
- Why the GIMP Team Obviously* Hates You (*We Actually Love You. **Mostly) Pat David from GIMP team presentation at SCaLE16x California 2016
- Earning Your Support Instead of Buying it: A How-to Guide to Open Source Assistance by Ian Turton at FOSS4G Seoul 2015