TechDraw Cotes parallèles verticales

From FreeCAD Documentation
Revision as of 19:54, 1 February 2022 by David69 (talk | contribs) (Created page with "{{GuiCommand/fr |Name=TechDraw ExtensionCreateVertCoordDimension |Name/fr=TechDraw Cotes parallèles verticales |MenuLocation=TechDraw → Extensions: Dimensions → Cotes par...")
Other languages:

TechDraw Cotes parallèles verticales

Emplacement du menu
TechDraw → Extensions: Dimensions → Cotes parallèles verticales
Ateliers
TechDraw
Raccourci par défaut
Aucun
Introduit dans la version
0.20
Voir aussi
TechDraw Cotes parallèles horizontales, TechDraw Cotes parallèles obliques

Description

The TechDraw ExtensionCreateVertCoordDimension tool creates vertical coordinate dimensions: multiple evenly spaced dimensions starting from the same baseline.

On the right the created dimensions

Usage

  1. Optionally specify the cascade spacing with the TechDraw ExtensionSelectLineAttributes tool.
  2. Select three or more vertexes.
  3. The selection order of the first two vertexes determines the position of the baseline. If the vertex that is selected first is below the second, the baseline is created at the lowest vertex, else it is created at the highest vertex.
  4. There are several ways to invoke the tool:
  5. Coordinate dimensions with centered dimension texts are created.