Assembly3 Contrainte distance du point projeté
Cette documentation n'est pas terminée. Merci de nous aider et de contribuer à la documentation.
Modèle GuiCommand explique comment les commandes doivent être documentées. Parcourez Category:UnfinishedDocu pour voir d'autres pages incomplètes comme celle-ci. Voir Category:Command_Reference pour toutes les commandes.
Voir Écrire une page Wiki pour apprendre à éditer les pages du wiki, et aller à Contribuer à FreeCAD pour apprendre d'autres façons de contribuer.
Assembly3 ConstraintPointsProjectDistance |
Menu location |
---|
None |
Workbenches |
Assembly3 |
Default shortcut |
None |
Introduced in version |
- |
See also |
None |
Description
The Points project distance command constrains the distance of two 2D points in relation to a Straight line.
Based on the line's direction (the z axis of its implicit coordinate system (ICS)) setting the distance of two points along the line means to add the distance value to the first point's z value to receive the second point's z value (and ignoring the x and y values).
Usage
- Select two points (2D or 3D).
- Select a straight line (2D or 3D).
- Activate the Points project distance command using the:
- Points project distance button.
- Press the Solve constraints or the Quick solve button to recompute
- (if Auto recompute and Smart recompute are disabled).
Hub utilisateurs
- Démarrer avec FreeCAD
- Installation : Téléchargements, Windows, Linux, Mac, Logiciels supplémentaires, Docker, AppImage, Ubuntu Snap
- Bases : À propos de FreeCAD, Interface, Navigation par la souris, Méthodes de sélection, Objet name, Préférences, Ateliers, Structure du document, Propriétés, Contribuer à FreeCAD, Faire un don
- Aide : Tutoriels, Tutoriels vidéo
- Ateliers : Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test