Assembly3 ProjizierterPunktabstand

From FreeCAD Documentation
Revision as of 09:56, 10 September 2021 by FBXL5 (talk | contribs) (Created page with "== Anwendung ==")

Diese Dokumentation ist noch nicht fertiggestellt. Bitte hilf mit und trage etwas zur Dokumentation bei.

Die Seite GuiBefehl Modell erklärt, wie Befehle dokumentiert werden sollten. Unter Category:UnfinishedDocu findest du weitere unvollständige Seiten wie diese (und unter Category:UnfinishedDocu/de unvollständige Übersetzungen). Siehe Category:Command Reference für sämtliche Befehle (und Category:UnfinishedDocu/de für vorhandene Übersetzungen).

Siehe WikiSeiten, um zu lernen, wie die Wiki-Seiten bearbeitet werden und FreeCAD Unterstützen, um andere Wege zu entdecken, wie du einen Beitrag leisten kannst.

Other languages:

Assembly3 ProjizierterPunktabstand

Menüeintrag
Keiner
Arbeitsbereich
Assembly3
Standardtastenkürzel
Keiner
Eingeführt in Version
-
Siehe auch
Keiner

Beschreibung

The Points project distance command constrains the distance of two 2D points in relation to a Straight line.

Based on the line's direction (the z axis of its implicit coordinate system (ICS)) setting the distance of two points along the line means to add the distance value to the first point's z value to receive the second point's z value (and ignoring the x and y values).

Anwendung

  1. Select two points (2D or 3D).
  2. Select a straight line (2D or 3D).
  3. Activate the Points project distance command using the:
  4. Press the Solve constraints or the Quick solve button to recompute
(if Auto recompute and Smart recompute are disabled).