FreeCAD ve DXF içe aktarma
Yasal Uyarı
DXF Dosyalarını içe aktarabilmek için birkaç dosyayı manuel olarak yüklemeniz gerekir. Neden derseniz? Bu kütüphaneler, FreeCAD'den başka bir lisansla yayınlanmaktadır, dolayısıyla FreeCAD geliştiricileri, FreeCAD-Uygulaması ile birlikte sunmayacaktır.
Nasıl kurulur
Draft-dxf-importer uygulamasını kurmak için:
- Yorik'in Github hesabına gidin ve bu dosyaları indirin (sağ tarafta "ZIP olarak indir" seçeneğini seçebilirsiniz).
- Dosyaları makro klasörünüze yerleştirin.
- Ubuntu'da bu normal
/home/your_user_name/.FreeCAD Dizin gizlidir. Görünür hale getirmek için gizliliğini kaldırmanız gerekebilir.
- Windows'ta, (standart) makro dizininiz
C:\Users\kullanıcı_adınız\AppData\Roaming\FreeCAD
Makro dizininizin nerede olduğundan emin değilseniz,
- FreeCAD'i açın ve "Düzenle → Seçenekler" e gidin,
- Sol sütunda "Genel" i seçin ve Seçenekler penceresinin sağ üst köşesinde "Makro" kategorisini seçin. "Makro Yolu" adlı bir alan olmalı.
Tutorial: Dxf Importer Install
Setting Options
You can set several import options for DWG/DXF. Depending on your version you have to use a different method.
- FreeCAD 0.14 and older
- Open FreeCAD.
- Switch to the Draft Workbench. (Otherwise you won't see the options)
- Go to "Edit → Preferences" and select "Draft" in the left column.
- Select "DXF / DWG-Options" in the top right corner of the preferences-window.
- FreeCAD 0.15 and above
- Open FreeCAD.
- Switch to the Draft Workbench. (Otherwise you won't see the options)
- Go to "Edit → Preferences".
- Now you shoould see an icon labeled "Import-Export" in the left column. Select that.
Tips and Tricks
Sometimes DXF Files don't seem to import although they open up in 2D-DXF-CAD-Programs without problems.
You can try:
- Go to Edit → Preferences → Import/Export → DXF/DWG and untick the option "join geometry" and try again.
- Remember that maybe now you won't have coincident end-of-line-points. You will have to make them coincident yourself.
- You can do this with the command "Close Shape" in the sketcher workbench (needs version 0.15) or you can apply the constraints manually
You can also try:
- Go to Edit → Preferences → Draf → General and adjust the value of "Tolerance" (default: 0,05)
- Try again
Good luck on importing.