Arch: Staffe

From FreeCAD Documentation
Revision as of 09:44, 11 February 2018 by Renatorivo (talk | contribs) (Created page with "# Creare un elemento Struttura # Selezionare una qualsiasi faccia della struttura # Selezionare {{KEY|16px Staffe armat...")

Staffe armatura

Posizione nel menu
Arch → Strumenti armatura
Ambienti
Arch
Avvio veloce
None
Vedere anche
Armatura, Armatura a U, Armatura dritta, Armatura a L, Armatura sagomata, Armatura elicoidale
 
Questo comando fa parte del Addon Reinforcement, che è possibile installare tramite il menu Strumenti → Addons Manager

Descrizione

Lo strumento Staffe armatura crea una serie di staffe per armatura in un elemento strutturale selezionato.

Utilizzo

  1. Creare un elemento Struttura
  2. Selezionare una qualsiasi faccia della struttura
  3. Selezionare Staffe armatura dagli strumenti Armatura
  4. Sul lato sinistro dello schermo appare un pannello delle azioni come il seguente
  5. Selezionare l'orientamento desiderato
  6. Fornire i dati per front cover, right side cover, left side cover, bottom cover, top cover, rounding factor and diameter of the rebar
  7. Selezionare la modalità di distribuzione per la quantità e per la spaziatura
  8. Se la spaziatura è selezionata, l'utente può anche optare per una spaziatura personalizzata
  9. Cliccare sulla faccia selezionata serve per verificare o modificare la faccia per la distribuzione dell'armatura
  10. Cliccare OK o Apply per generare l'armatura
  11. Cliccare Cancel per uscire dal pannello delle azioni

Properties

  • DatiFront Cover: The distance between rebar and selected face.
  • DatiRight Cover: The distance between the right end of the rebar to right face of the structure.
  • DatiLeft Cover: The distance between the left end of the rebar to the left face of the structure.
  • DatiBottom Cover: The distance between rebar from the bottom face of the structure.
  • DatiTop Cover: The distance between rebar from the top face of the structure.
  • DatiBent Angle: Bent angle defines the angle at the ends of a stirrup.
  • DatiBent Factor: Bent Factor defines length of stirrup end.
  • DatiAmount: The amount of rebars.
  • DatiSpacing: The distance between the axes of each bar.

Scripting

The Stirrup Rebar tool can by used in macros and from the python console by using the following function:

makeStirrup(LeftCover, RightCover, TopCover, BottomCover, FrontCover, BentAngle, BentFactor, Diameter, Rounding, AmountSpacingCheck, AmountSpacingValue, Structure, Facename)
  • Adds a Stirrup reinforcing bar object to the given structural object.
  • If no Structure and Facename is given, it will take user selected face as input.
  • Here CoverAlong argument is having type tuple.
  • Returns the new Rebar object.

Example: Creating Stirrup rebar.

import Arch, Stirrup
structure = Arch.makeStructure(length=1000.0, width=400.0, height=400.0)
structure.ViewObject.Transparency = 80
FreeCAD.ActiveDocument.recompute()
rebar = Stirrup.makeStirrup(20,  20, 20, 20, 20, 135, 4, 8, 2, True, 10, structure, "Face6")

Changing properties of Stirrup rebar.

import Stirrup
Stirrup.editStirrup(rebar, 20, 20, 20, 20, 50, 90, 4, 8, 2, True, 6, structure, "Face6")