MES: Warunek brzegowy prędkości przepływu
FEM ConstraintFlowVelocity |
Lokalizacja w menu |
---|
Model → Warunki brzegowe dla płynu → Warunek brzegowy prędkości przepływu |
Środowisko pracy |
MES |
Domyślny skrót |
brak |
Wprowadzono w wersji |
- |
Zobacz także |
Warunek początkowy prędkości przepływu |
Opis
Definiuje prędkość przepływu jako warunek brzegowy dla krawędzi w 2D lub powierzchni w 3D.
Usage
- Press the Flow velocity boundary condition button or select the menu Model → Fluid boundary conditions → Flow velocity boundary condition.
- Select the target Edges or Faces.
- Press the Add button.
- Uncheck Unspecified to activate the necessary fields for edition.
- Set the velocity values or (introduced in version 0.21) specify a formula.
Formulas
It is possible to define a velocity by specifying the velocity profile as formula. In this case the solver sets the velocities at the different positions according to the profile.
To specify for example the velocity profile
for (assuming that e.g. a pipe has the wall at y = 1 m and y = 2 m)
enter this to the Formula field:
Variable Coordinate 2; Real MATC "6*(tx-1)*(2-tx)"
This code has the following syntax:
- the prefix Variable specifies that the velocity is not a constant but a variable
- the variable to calculate the velocity is Coordinate 2, meaning y
- the velocity values are returned as Real (floating point value)
- MATC is the prefix for the Elmer solver that the following code is a formula
- tx is always the name of the variable in MATC formulas, no matter that tx in our case is actually y
That y will only be in the range is set because MATC only evaluates the tx range where the result is positive. This behavior is a bit special but has the advantage that one does not need to specify the range manually.
It is also possible to use more than one variable. See as example the definition of rotations in the displacement constraint.
Notes
- Any vector component that should be the result of the solver must be set as Unspecified.
- If the target face or edge is not aligned with the main Cartesian coordinate system, it is possible to set the option Normal to boundary.
- If Normal to boundary is checked, the normal vector to the selected edge or face is X and it will be oriented away from the mesh domain.
- For example, if a flow of 20 mm/s of air should enter the domain, then with Normal to boundary one must input -20 mm/s in the Velocity x field.
- For a wall with non-slip condition, set all velocity components to 0.
- For a symmetry condition, set the the flow to (0, Unspecified, Unspecified) if Normal to boundary is checked.
- Materiał: Bryła, Ciecz, Nieliniowy materiał mechaniczny, Materiał zbrojony (beton), Edytor materiału
- Geometria elementu: Geometria elementu, Obrót w okół osi, Geometria elementu 2D, Element przepływu
Wiązania
- Elektromagnetyczne: Potencjał elektryczny, Gęstość prądu, Magnetyzacja
- Geometryczne: Obrót w płaszczyźnie, Zapis wyników z przekroju, Zdefiniuj odkształcenie
- Mechaniczne: Zdefiniuj przytwierdzenie, Zdefiniuj przemieszczenie, Zdefiniuj kontakt, Zdefiniuj powiązanie, Wiązanie sprężyny, Zdefiniuj siłę, Zdefiniuj obciążenie ciśnieniem, Zdefiniuj siłę odśrodkową, Zdefiniuj obciążenie ciężarem własnym
- Termiczne: Warunek początkowy temperatury, Zdefiniuj strumień ciepła, Zdefiniuj temperaturę, Zdefiniuj objętościowe źródło ciepła
- Zmieniające wiązania: Zdefiniuj przenikalność elektryczną próżni
- Siatki: Siatka Netgen, Siatka GMSH, Warstwa graniczna siatki, Obszar siatki, Grupa siatki, Utwórz zestaw węzłów, Siatka MES na obiekt środowiska Siatka
- Solver: Narzędzia CalculiX, Elmer, Mystran, Z88; Równania: Elastyczności, Elektrostatyczne, Siły elektrostatycznej, Magnetodynamiczne, RMagnetodynamiczne 2D, Przepływu, Strumienia, Ciepła; Solver: Kontrola pracy solvera, Uruchom solver
- Wyniki: Oczyszczanie z wyników, Prezentacja wyników; Postprocessing: Zastosuj zmiany, Prezentacja graficzna, Filtr rozpraszający, Skalarny filtr obcinający, Filtr odcięcia funkcji, Filtr odcięcia obszaru, Filtr konturów, Filtr danych wzdłuż linii, Wykres liniowości naprężeń, Filtr obcinania danych w punkcie, Utwórz funkcję, Filtr funkcji płaszczyzny, Filtr funkcji sfery, Filtr funkcji walca, Filtr funkcji prostopadłościanu
- Dodatkowe: Konfiguracja, Instalacja środowiska MES, Siatka, FEM Solver, CalculiX, Beton, Rodzaje elementów
- Jak zacząć
- Instalacja: Pobieranie programu, Windows, Linux, Mac, Dodatkowych komponentów, Docker, AppImage, Ubuntu Snap
- Podstawy: Informacje na temat FreeCAD, Interfejs użytkownika, Profil nawigacji myszką, Metody wyboru, Nazwa obiektu, Edytor ustawień, Środowiska pracy, Struktura dokumentu, Właściwości, Pomóż w rozwoju FreeCAD, Dotacje
- Pomoc: Poradniki, Wideo poradniki
- Środowiska pracy: Strona Startowa, Złożenie, BIM, CAM, Rysunek Roboczy, MES, Inspekcja, Siatka, OpenSCAD, Część, Projekt Części, Punkty, Inżynieria Wsteczna, Robot, Szkicownik, Arkusz Kalkulacyjny, Powierzchnia 3D, Rysunek Techniczny, Test Framework