Assembly3 Contrainte distance du point projeté
Cette documentation n'est pas terminée. Merci de nous aider et de contribuer à la documentation.
Modèle GuiCommand explique comment les commandes doivent être documentées. Parcourez Category:UnfinishedDocu pour voir d'autres pages incomplètes comme celle-ci. Voir Category:Command_Reference pour toutes les commandes.
Voir Écrire une page Wiki pour apprendre à éditer les pages du wiki, et aller à Contribuer à FreeCAD pour apprendre d'autres façons de contribuer.
|
Emplacement du menu |
---|
Aucun |
Ateliers |
Assembly3 |
Raccourci par défaut |
Aucun |
Introduit dans la version |
- |
Voir aussi |
Aucun |
Description
The Points project distance command constrains the distance of two 2D points in relation to a Straight line.
Based on the line's direction (the z axis of its implicit coordinate system (ICS)) setting the distance of two points along the line means to add the distance value to the first point's z value to receive the second point's z value (and ignoring the x and y values).
Usage
- Select two points (2D or 3D).
- Select a straight line (2D or 3D).
- Activate the
Points project distance command using the:
Points project distance button.
- Press the
Solve constraints or the
Quick solve button to recompute
- (if
Auto recompute and
Smart recompute are disabled).
- (if
![](/images/thumb/9/94/User_hub.png/24px-User_hub.png)
- Démarrer avec FreeCAD
- Installation : Téléchargements, Windows, Linux, Mac, Logiciels supplémentaires, Docker, AppImage, Ubuntu Snap
- Bases : À propos de FreeCAD, Interface, Navigation par la souris, Méthodes de sélection, Objet name, Préférences, Ateliers, Structure du document, Propriétés, Contribuer à FreeCAD, Faire un don
- Aide : Tutoriels, Tutoriels vidéo
- Ateliers : Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test