Assembly ZahnstangeRitzelVerbindungErstellen

From FreeCAD Documentation
This page is a translated version of the page Assembly CreateJointRackPinion and the translation is 54% complete.
Other languages:

Diese Dokumentation ist noch nicht fertiggestellt. Bitte hilf mit und trage etwas zur Dokumentation bei.

Die Seite GuiBefehl Modell erklärt, wie Befehle dokumentiert werden sollten. Unter Category:UnfinishedDocu findest du weitere unvollständige Seiten wie diese (und unter Category:UnfinishedDocu/de unvollständige Übersetzungen). Siehe Category:Command Reference für sämtliche Befehle (und Category:UnfinishedDocu/de für vorhandene Übersetzungen).

Siehe WikiSeiten, um zu lernen, wie die Wiki-Seiten bearbeitet werden und FreeCAD Unterstützen, um andere Wege zu entdecken, wie du einen Beitrag leisten kannst.

Assembly ZahnstangeRitzelVerbindungErstellen

Menüeintrag
Assembly → Zahnstange-Ritzel-Verbindung erstellen
Arbeitsbereich
Assembly
Standardtastenkürzel
Q
Eingeführt in Version
1.0
Siehe auch
Keiner

Beschreibung

The Assembly CreateJointRackPinion tool creates a rack and pinion joint that couples the translation of a part of a slider joint and the rotation of a part of a revolute joint.

Anwendung

  1. Optionally select two geometric entities of two different parts that have previously been used to define a Slider joint and a Revolute joint.
  2. There are several ways to invoke the tool:
    • Press the Create Rack and Pinion Joint button.
    • Select the Assembly → Create Rack and Pinion Joint option from the menu.
    • Use the keyboard shortcut: Q.
  3. The Create Joint dialog opens in the Task panel listing the pre-selected entities.
  4. For further steps see Assembly CreateJointFixed.

Hinweise

  • Pitch radius refers to the pitch circle of the pinion. It is stored in the DatenDistance property and is the basis to calculate the ratio between rotation and translation.

Eigenschaften

Siehe auch: Eigenschafteneditor.

A RackPinion object is derived from an App FeaturePython object and inherits all its properties. See Assembly CreateJointFixed for additional properties.