Translations:Whiffle Ball tutorial/6/ro

From FreeCAD Documentation

Scurtături partea 1

  1. Insert box ("cube002") by clicking on
  2. Change the dimensions of the box ("cube002") (see data-tab) to
    1. Length= 140 mm
    2. Width= 112 mm
    3. Heigth= 112 mm
  3. Change the placement of the box ("cube002") to
    1. X: -70 mm
    2. Y: -56 mm
    3. Z: -56 mm
  4. Insert box ("cube003") by clicking on
  5. Change the dimensions of the box ("cube003") (see data-tab) to
    1. Length= 180 mm
    2. Width= 180 mm
    3. Heigth= 180 mm
  6. Change the placement of the box ("cube003") to
    1. X: -90 mm
    2. Y: -90 mm
    3. Z: -90 mm
  7. Make sure "cube002" is selected in tree view, otherwise select it
  8. Choose Edit > Duplicate selection from the top menu to get another box ("cube004")
  9. Make sure "cube003" is selected in tree view, otherwise select it
  10. Choose Edit > Duplicate selection from the top menu to get another box ("cube005")
  11. Select "cube003" and "cube002", but make sure, that "cube003" is selected FIRST
  12. Activate menu to change placement
  13. Tick option "Apply incremental changes to object placement", notice that all values are reset ...
  14. Choose "Rotation: X-Axis" and "Angle: 45°" and click on Apply
  15. Choose "Rotation: Z-Axis" and "Angle: 45°" and click on Apply
  16. Click on OK to close the dialog
  17. Apply a boolean cut by clicking , the resulting object will be named "cut001"