Translations:Whiffle Ball tutorial/5/ro

From FreeCAD Documentation

!!FUZZY!!=== Setarea formelor elementare ===

  1. Comuntați pe Modulul Piese Part Workbench
  2. Creați un nou document făcând click pe File New
  3. Inserați o casetă făcând click pe
  4. Asigurați-vă că ("cube") este selectat în vederea arborescentă
  5. Change the dimensions of the box (see data-tab) to
    1. Length= 90 mm
    2. Width= 90 mm
    3. Heigth= 90 mm
  6. Click into the value field of placement-row in data-tab so that ... appears on right side
  7. Click on ... to change the placement of the box
    1. X: -45 mm
    2. Y: -45 mm
    3. Z: -45 mm
  8. Click on OK to close dialog
  9. Insert box ("cube001") by clicking on
  10. Make sure the box ("cube001") is selected in tree view
  11. Change the dimensions of the box ("cube001") (see data-tab) to
    1. Length= 80 mm
    2. Width= 80 mm
    3. Heigth= 80 mm
  12. Change the placement of the box ("cube001") to
    1. X: -40 mm
    2. Y: -40 mm
    3. Z: -40 mm
  13. Click to insert a cylinder ("cylinder")
  14. Make sure the cylinder ("cylinder") is selected in tree view
  15. Change radius of cylinder to be 27,5 mm, change height to be 120 mm
  16. Change placement values of "cylinder" to be
    1. X: 0 mm
    2. Y: 0 mm
    3. Z: -60 mm
  17. Click to insert a cylinder ("cylinder001")
  18. Change radius of "cylinder001" to be 27,5 mm, change height to be 120 mm
  19. Choose Edit > Duplicate selection from the top menu to get another cylinder ("cylinder002")
  20. Make sure "cylinder001" is selected in tree view
  21. Change placement values of "cylinder001" to be
    1. Y: 60 mm
    2. Rotation axis with angle
    3. Axis: X
    4. Angle: 90°
  22. Click on OK to apply values and close dialog
  23. Make sure "cylinder002" is selected in tree view
  24. Change placement values of "cylinder001" to be
    1. X: -60 mm
    2. Rotation axis with angle
    3. Axis: Y
    4. Angle: 90°
  25. Click on OK to apply values and close dialog
  26. Click on to change to axometric view
  27. Click on to zoom to fit all
  28. Select "cube001", "cylinder", "cylinder001" and "cylinder002" and fuse them by clicking
  29. Select "cube" and "fusion", but make sure, that "cube" is selected FIRST
  30. Apply a boolean cut by clicking
  31. Forma de bază finalizată ar trebui să arate astfel: