Jump to content

Translations:Sketcher Dialog/33/en

From FreeCAD Documentation
Option Description
This button recomputes the document.
This button opens a menu:
  • Auto-update: If checked, the whole document is recomputed after every sketch action. Not advisable for complex documents.
  • Display grid: Toggles the visibility of the grid. introduced in 1.1
  • Grid auto-spacing: If checked, grid spacing is automatically adapted based on the view dimensions. Stored in the ViewGrid Auto property of the sketch. introduced in 1.1
  • Snap to grid: Toggles grid snap in all sketches. If checked, the cursor will snap to grid lines and grid intersections. Snapping occurs if the distance of the cursor to a grid line is 20% of the grid spacing or less. Snapping also works if the grid is invisible. introduced in 1.1
  • Spacing: Specifies the distance between two subsequent grid lines. Used as a base value if Grid auto-spacing is enabled. Stored in the ViewGrid Size property of the sketch. introduced in 1.1
  • Snap to objects: If checked, the cursor will snap to edges of geometry and midpoints of lines and arcs. introduced in 1.1
  • Snap angle: Specifies the angle for angular snap. Snapping will occur at multiples of this value starting from the direction of the positive X-axis of the sketch. The Ctrl key must be held down for this snap. Angular snap only works when creating certain geometry. introduced in 1.1
  • Rendering order: items in the list can be dragged to change the rendering order of all sketches. In case of coincident objects, the rendering order determines which elements appear on top, and are therefore selected first, in the 3D View. introduced in 1.1