Translations:Part Sweep/16/en

From FreeCAD Documentation
  1. There are several ways to invoke the command:
    • Press the Sweep... button.
    • Select the Part → Sweep... option from the menu.
  2. The Sweep task panel opens.
  3. In the Available Profiles list on the left select a profile and click on the right arrow to place it in the Selected profiles list on the right.
  4. Repeat if more than one profile is desired.
  5. The up and down arrows will reorder the list on the right. But this has no impact on the result. The position of the profiles along the spine determines in which order they are used.
  6. Click on the Sweep Path button, then choose either mode of selection:
    • Segment selection: select one or more contiguous edges in the 3D view (press CTRL for multiple selection) and click Done. The sweep will only be generated along the selected edges.
    • Complete path selection: switch to the Tree view, select the object to be used as spine, switch back to the task panel and click Done. The sweep will be generated along all the contiguous edges found in the object.
  7. Define options Solid and Frenet.
  8. Click OK.