Translations:PartDesign Plane/7/en

From FreeCAD Documentation
  1. Press the Create a datum plane button.
  2. Define Plane parameters. Select a first reference in the 3D view to filter the available attachment modes.
  3. Depending on the selected reference, there may be one or more attachment modes available in the the list. The most likely one will automatically be selected and shown in bold in the list. The text Attached with mode along with the attachment mode name will appear in green at the top of the Parameters panel.
  4. To add an additional reference, press the next Reference button. Once pressed its label changes to Selecting... until a selection is made.
  5. Select an attachment mode in the list.
  6. Offsets: Define Attachment Offset values. Note that the x, y and z offset represent the local coordinate system of the datum plane, not the world coordinate system. Therefore the z-offset is always the offset along the datum plane normal vector.
  7. Rotation: Changing "Around x-axis" makes the plane rotate around its local X-axis. Changing "Around y-axis" makes the plane rotate around its local Y-axis. Changing "Around z-axis" makes the plane rotate around its local Z-axis.
  8. Press OK.