Translations:Manual:All workbenches at a glance/12/en

Tool	Description	Tool	Description
Point	Draws a point	Polyline	Draws a line made of multiple line segments
Line	Draws a line segment from 2 points	Arc	Draws an arc segment from the center, radius, start angle and end angle
Arc 3 points	Draws an arc segment from two endpoints and another point on the circumference	Arc of ellipse	Creates an arc of ellipse
Arc of hyperbola	Creates an arc of hyperbola	Arc of parabola	Creates an arc of parabola
Circle	Draws a circle from the center and radius	Circle 3 points	Draws a circle from three points on the circumference
Ellipse	Draws an ellipse by a center point, major radius point and minor radius point	Ellipse 3 points	Draws an ellipse by major diameter (2 points) and minor radius point
Rectangle	Draws a rectangle from 2 opposite points	Centered rectangle	Creates a centered rectangle
Rounded rectangle	Creates a rounded rectangle	Triangle	Draws a regular triangle inscribed in a construction geometry circle
Square	Draws a regular square inscribed in a construction geometry circle	Pentagon	Draws a regular pentagon inscribed in a construction geometry circle
Hexagon	Draws a regular hexagon inscribed in a construction geometry circle	Heptagon	Draws a regular heptagon inscribed in a construction geometry circle
Octagon	Draws a regular octagon inscribed in a construction geometry circle	Regular polygon	Creates a regular polygon. The number of sides can be specified
Slot	Creates a slot	Arc slot	Creates an arc slot
B-spline by control points	Creates a B-spline curve by control points	Periodic B-spline by control points	Creates a periodic (closed) B-spline curve by control points.
B-spline by knots	Creates a B-spline curve by knot points	Periodic B-spline by knots	Creates a periodic (closed) B-spline curve by knot points
Construction mode	Toggles an element to/from construction mode	Dimension	Based on the current selection, it offers appropriate dimensional/geometric constraints
Horizontal distance	Fixes the horizontal distance between two points or the endpoints of a line	Vertical distance	Fixes the vertical distance between two points or the endpoints of a line
Distance	Fixes the length of a line, the distance between two points, the perpendicular distance from a point to a line, the distance between edges of two circles/arcs or between a circle/arc and a line, or the length of an arc	Auto radius/diameter	Fixes the radius of arcs and B-spline weight circles, and the diameter of circles
Radius	Fixes the radius of circles, arcs and B-spline weight circles	Diameter	Fixes the diameter of circles and arcs.
Angle	Fixes the angle between two edges, the angle of a line with the horizontal axis of the sketch, or the aperture angle of a circular arc	Lock	Constrains the selected item by setting vertical and horizontal distances relative to the origin, thereby locking the location of that item
Coincident (unified)	Creates a coincident constraint between points, fixes points on edges or axes or creates a concentric constraint	Horizontal/vertical	Constrains lines or pairs of points to be horizontal or vertical, whichever is closest to the current alignment
Horizontal	Constrains the selected lines or polyline elements to a true horizontal orientation. More than one object can be selected before applying this constraint	Vertical	Constrains the selected lines or polyline elements to a true vertical orientation. More than one object can be selected before applying this constraint.
Parallel	Constrains lines to be parallel.	Perpendicular	Constrains two lines to be perpendicular
Tangent or collinear	Creates a tangent constraint between two selected entities or a co-linear constraint between two line segments	Equal length	Constrains two selected entities equal to one another. If used on circles or arcs their radii will be set equal
Symmetric	Constrains two points to be symmetrical around a line or axis, or around a third point	Block	Blocks edges in place with a single constraint. It is mainly intended for B-splines
Fillet	Creates a fillet between two non-parallel edges	Chamfer	Creates a chamfer between two non-parallel edges
Trim	Trims an edge at the nearest intersections with other edges	Split	Splits an edge while transferring most constraints
Extend	Extends or shortens a line or an arc to an arbitrary location, or to a target edge or point	External geometry	Projects edges and/or vertices belonging to objects outside the sketch onto the sketch plane
Projection	Projects edges and/or vertices belonging to objects outside the sketch onto the sketch plane.	Intersection	Intersects faces and/or edges belonging to objects outside the sketch with the sketch plane.
Carbon copy	Copies all geometry and constraints from another sketch into the active sketch	Select origin	Selects the origin of the sketch
Select horizontal axis	Selects the horizontal axis of the sketch	Select vertical axis	Selects the vertical axis of the sketch
Array transform	Moves or optionally creates copies of selected elements	Polar transform	Rotates or optionally creates rotated copies of selected elements
Scale transform	Scales or optionally creates scaled copies of selected elements	Offset geometry	Creates equidistant edges around selected edges
Symmetry	Creates mirrored copies of selected elements	Remove axes alignment	Removes the axes alignment of selected edges by replacing Horizontal and Vertical constraints with Parallel and Perpendicular constraints