Translations:Draft tutorial/75/en
4. We will create arcs and lines.
- 4.1. Press Arc.
- 4.2. Set the Center to
(0, 0, 0)
, and press Enter. - 4.3. Set the Radius to
30 mm
, and press Enter. - 4.4. Set the Start angle to
60.0°
, and press Enter. - 4.5. Set the Aperture angle to
60.0°
, and press Enter. - 4.6. Repeat the same procedure for a second arc with a radius of
25 mm
, the other properties are the same.