Jump to content

Translations:Draft ShapeString tutorial/42/en

From FreeCAD Documentation
  1. Create the Draft ShapeString first.
  2. Create a PartDesign Body, make it active, and create a base solid by adding a primitive, or by extruding a sketch with PartDesign Pad.
  3. Move the ShapeString object into the active body.
  4. Attach the ShapeString object to one of the faces of the solid, or to an edge of the sketch, using Part EditAttachment.
  5. Now create a PartDesign Pad or a PartDesign Pocket from the ShapeString, in order to produce an additive or a subtractive feature respectively.