Translations:Draft ShapeString tutorial/18/en
3. Create a chamfer.
- 3.1. Select the upper edge (
Edge6
) on the front face of theCube
in the 3D view. - 3.2. Press
Chamfer.
- 3.3. In the Chamfer edges task panel go to Selection, choose Select edges. As Chamfer type choose
Equal distance
, then set Length to5 mm
. - 3.4. Press OK. This will create a
Chamfer
object. - 3.5. In the tree view, select
Chamfer
, in the View tab change the value of Line Width to2.0
.