Translations:CAM OpActiveToggle/7/en

1. Select an operation in the Operations group belonging to a Job. A deactivated operation can be recognized by its grayed out label and icon.
2. There are several ways to invoke the command:
   • Press the Toggle Operation button.
   • Select the CAM → Toggle Operation option from the menu.
   • Use the keyboard shortcut: P then X.
3. The result depends on the selected operation:
   • If you have selected an active operation the command deactivates it:
     • The operation icon is replaced with the command icon: .
     • The operation icon and label are grayed out.
     • The paths generated from the operation disappear from the 3D View.
     • When using the CAM Inspect command or the CAM Post command, the operation's G-code is not provided.
     • If the operation has dressups, they are also shown in an inactive state in the Tree View.
   • If you have selected a deactivated operation the command activates it:
     • The operation icon is replaced with that belonging to the operation.
     • The operation icon and label are no longer grayed out.
     • The paths generated from the operation are recomputed and displayed in the 3D View.
     • When using the CAM Inspect command or the CAM Post command, the operation's G-code is provided again.