Translations:Basic Part Design Tutorial 019/22/en

From FreeCAD Documentation
  1. Select the line defined by P2 and P3 in Fig: MS3.
  2. Click Horizontal distance constraint:
    1. A dimension will appear between the endpoints of the selected line. This dimension is the current distance.
    2. Additionally a dialog will appear:
    3. Assign Length = 53 mm.
    4. To be able to reference this dimension later a name is required. You are free to use any name, it need only be unique within the sketch. Assign Name = length.
    5. Click OK.
  3. The result should resemble Fig: MS4