Translations:Assembly3 Workbench/36/de

From FreeCAD Documentation
  • Fixiert 6 Freiheitsgrade, 0 bleiben unbestimmt:
    • Fixierung (Schloss): Die Fixiereinschränkung legt alle Freiheitsgrade einer Fläche. Sie sollte in jedem Zusammenbau zur Festlegung eines Basisteils genutzt werden. Es ist sinnvoll auch gleich die "Bewegung ausschließen für fixierte Teile"-Funktion (in der Werkzeugleiste) zu aktivieren, um damit ein unbeabsichtigtes Verschieben zu verhindern. In der Regel ist es egal welche Fläche, Linie oder Punkt benutzt wird um ein Teil zu fixieren. Man beachte, dass die Fixierung nur auf den aktuellen Zusammenbau wirkt, d.h. im Falle einer Unterbaugruppe braucht der übergeordnete Zusammenbau noch ein eigenes fixiertes Teil.
    • Anhang: Legt die Koordinatensysteme der ausgewählten Elemente (zweier oder mehrerer Teile) deckungsgleich aufeinander. Dies ist die für die Berechnung günstigste Funktion und sollte, wo immer möglich, benutzt werden. Man beachte, dass man die Eigenschaften der Elemente nutzen kann, um Abstände und Winkel einzustellen, wenn die Elemente nicht optimal zueinander ausgerichtet sind.
  • Fixiert 5 Freiheitsgrade, 1 bleibt unbestimmt:
    • Lagegleiche Ebenen: fixes Tx,Ty,Tz, Rx,Ry. Only Rz is free. There remains the rotation around the normal passing through the ‘‘center of the plane’’.
  • Fixiert 4 Freiheitsgrade, 2 bleiben unbestimmt:
    • Axial Alignment: fixes Tx,Ty, Rx,Ry. Only Tz, Rz are free. There remains the rotation around the axis of the shape and the translation along this same axis. Two PointOnLine constraints (if the two points are different) give the same result. The '‘Colinear'’ constraint too.
    • PointOnLine: This eliminates the translation and rotation along the normals to the reference line. Only the translation and rotation along the line axis is allowed.
  • Fixiert 3 Freiheitsgrade, 3 bleiben unbestimmt:
    • Same Orientation: fixes Rx,Rz,Rz. All T's remain free.
    • Points Coincident: fixes Tx,Ty,Tz. All R's remain free.
    • PointOnPoint constraint eliminates the 3 translations.
    • Plane Alignment: fixes Tz, Rx,Ry (plane motion) and Rz. This eliminates the translation along the normal to the reference plane and the two rotations around the axes of this plane.
  • Fixiert 2 Freiheitsgrade, 4 bleiben unbestimmt:
    • Multi Parallel: fixes Rx,Ry. all T's and Rz remain. This eliminates the two rotations around the axes of the reference plane.
  • Fixiert 1 Freiheitsgrad, 5 bleiben unbestimmt:
    • Points in Plane: Fixes Tz. This eliminates the translation along the normal to the reference plane.
    • Points Distance: fixes the distance between the Element origins.
      This gives you more freedom than Points in Plane

Other

  • Points on Circle: fixes Tz and partially Tx,Ty. Freezes the point translation (or several points) on a circle or disk area. You must pick the circle second. This leaves all rotations free and gives limited translation in the circle reference plane.