기술도면 풍선
Appearance
Outdated translations are marked like this.
|
기술도면 풍선 |
| Menu location |
|---|
| 기술도면 → 주석→ 풍선 주석 삽입 |
| Workbenches |
| 기술도면 작업대 |
| Default shortcut |
| None |
| Introduced in version |
| 0.19 |
| See also |
| 기술도면 주석 |
설명
기술도면 풍선 도구를 사용하면 도면에 지시선이 있는 풍선을 추가할 수 있습니다.
용법
- 다음 중 하나를 선택하세요:
- 보기(페이지 또는 나무 보기에서).
- 보기에서 꼭지점.
- 보기에서 가장자리.
- 보기에서 선으로 닫힌 영역.
- 도구를 호출하는 방법은 여러 가지가 있습니다.
- 보기 또는 영역이 선택된 경우:
- 커서가 풍선 아이콘으로 바뀝니다.
- 풍선의 원점을 찾으려면 페이지의 한 지점을 클릭하세요.
풍선의 거품을 이동하려면 풍선의 중앙을 마우스 왼쪽 버튼으로 누른 채 끌어 이동합니다.
풍선의 속성을 변경하려면 페이지나 나무 보기에서 풍선을 두 번 클릭합니다. 그러면 풍선 작업창이 열립니다.
참고: 풍선의 위치는 도면상의 보기에 상대적이며 동일한 축척을 사용합니다.
구분 기호 사용
직사각형 모양을 사용할 때 구분 기호 "|"를 사용하여 추가할 수 있습니다. 예를 들어 "AAA|TEST|111"은 아래와 같이 표시됩니다.
속성
Data
- 데이터Text: 풍선 안에 표시되는 글자.
- 데이터Source View: 풍선 주석이 붙은 보기.
- 데이터Origin X: 보기의 중심점을 기준으로 하는 풍선 원점의 X좌표
- 데이터Origin Y: 보기의 중심점을 기준으로 하는 풍선 원점의 Y좌표
- 데이터End Type: 풍선 지시선의 끝 기호:
채워진 화살표,
열린 화살,
Tick,
점,
열린 ,
갈퀴,
채워진 삼각형, 없음.
- 데이터End Type Scale: Scale factor for the End Type.
- 데이터Bubble Shape: 풍선의 모양:
원형,
삼각형,
검사거울,
육각형,
정사각형,
직사각형, 없음.
- 데이터Shape Scale: Scale factor for the Shape.
- 데이터Text Wrap: Text wrap length; -1 means the text will never be wrapped and the result is in every case a single line.
- 데이터Kink Length: Distance from the Shape to the leader line kink.
- 데이터X: Horizontal position of the balloon bubble relative to the View.
- 데이터Y: Vertical position of the balloon bubble relative to the View.
View
- 보기Color: 풍선 주석 전체 색상.
- 보기Font: 풍선 거품에 사용할 글꼴의 이름.
- 보기Fontsize: 풍선 속 글자 크기(mm).
- 보기Line Visible: 풍선에 연결된 지시선이 표시되는지 여부.
- 보기Line Width: 풍선 선 두께.
스크립팅
자동 생성된 API 문서 및 FreeCAD 스크립팅 기본도 참고하세요.
bal1 = FreeCAD.ActiveDocument.addObject('TechDraw::DrawViewBalloon','Balloon')
rc = page.addView(bal1)
- Page: New Page, New Page From Template, Update Template Fields, Redraw Page, Print All Pages, Export Page as SVG, Export Page as DXF
- TechDraw Views: New View, Broken View, Section View, Complex Section View, Detail View, Projection Group, Clip Group, Insert SVG, Bitmap Image, Share View, Project Shape
- Views From Other Workbenches: Active View, Draft View, BIM View, Spreadsheet View
- Dimensions: Dimension, Length Dimension, Horizontal Length Dimension, Vertical Length Dimension, Radius Dimension, Diameter Dimension, Angle Dimension, Angle Dimension From 3 Points, Area Annotation, Horizontal Extent Dimension, Vertical Extent Dimension, Repair Dimension References
- Hatching: Image Hatch, Geometric Hatch
- Symbols: Weld Symbol, Surface Finish Symbol, Hole/Shaft Fit
- Stacking: Stack Top, Stack Bottom, Stack Up, Stack Down
- Attributes/Modifications: Select Line Attributes, Cascade Spacing and Delta Distance, Change Line Attributes, Extend Line, Shorten Line, Toggle View Lock, Position Section View, Align Horizontal Chain Dimensions, Align Vertical Chain Dimensions, Align Oblique Chain Dimensions, Cascade Horizontal Dimensions, Cascade Vertical Dimensions, Cascade Oblique Dimensions, Area Annotation, Arc Length Annotation, Customize Format Label
- Centerlines/Threading: Circle Centerlines, Bolt Circle Centerlines, Cosmetic Thread Hole Side View, Cosmetic Thread Hole Bottom View, Cosmetic Thread Bolt Side View, Cosmetic Thread Bolt Bottom View, Cosmetic Intersection Vertices, Offset Vertex, Cosmetic 1 Point Circle, Cosmetic 2 Point Circle, Cosmetic 3 Point Circle, Cosmetic Arc, Cosmetic Parallel Line, Cosmetic Perpendicular Line
- Format/Organize Dimensions Horizontal Chain Dimension, Vertical Chain Dimension, Oblique Chain Dimension, Horizontal Coordinate Dimension, Vertical Coordinate Dimension, Oblique Coordinate Dimension, Horizontal Chamfer Dimension, Vertical Chamfer Dimension, Arc Length Dimension, Insert '⌀' Prefix, Insert '□' Prefix, Insert 'n×' Prefix, Remove Prefix, Increase Decimal Places, Decrease Decimal Places
- Annotations: Text Annotation, Rich Text Annotation, Balloon Annotation, Axonometric Length Dimension
- Add Lines: Leader Line, Centerline on Face, Centerline Between 2 Lines, Centerline Between 2 Points, Cosmetic Line Through 2 points, Edit Line Appearance, Toggle Edge Visibility
- Add Vertices: Cosmetic Vertex, Midpoint Vertices, Quadrant Vertices
- Miscellaneous: Remove Cosmetic Object
- Additional: Line Groups, Templates, Hatching, Geometric dimensioning and tolerancing, Preferences
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Material, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub