스케치 변환
Appearance
Outdated translations are marked like this.
|
스케치 변환 |
| Menu location |
|---|
| Sketch → Sketcher tools → Array transform |
| Workbenches |
| 스케치 작업대 |
| Default shortcut |
| W |
| Introduced in version |
| 1.0 |
| See also |
| None |
설명
용법
See also: Drawing aids.
Pos-OVP = Positional On-View-Parameters.
Dim-OVP = Dimensional On-View-Parameters.
도형 이동하기
- 하나 이상의 모서리 및 점을 선택합니다. 선택한 요소에 적용된 구속도 함께 처리됩니다. 그 외의 다른 모든 구속(원점에서의 거리 구속 등)은 삭제됩니다.
- 도구를 호출하는 방법에는 여러 가지가 있습니다.
- 커서가 십자 모양으로 바뀌고 도구 아이콘이 커서 옆에 표시됩니다.
- 변환 매개변수 입력창이 스케치 대화상자 상단에 추가됩니다.
- 변환 방향(vector)의 시작점을 선택합니다. 또는 Pos-OVP의 경우: X 및 Y 좌표를 입력합니다.
- 변환 방향의 끝점을 선택합니다. 또는 Dim-OVP의 경우: 변환 방향의 길이 및 각도를 입력합니다. 각도는 스케치의 X축을 기준으로 합니다.
- 요소가 이동됩니다. Pos-OVP 또는 Dim-OVP 기반 제약 조건은 추가되지 않습니다.
도형 복사하기
- 하나 이상의 모서리 및 점을 선택합니다. 선택한 요소에 적용된 구속도 함께 처리됩니다.
- 위에서 설명한 대로 도구를 호출합니다.
- 커서가 십자 모양으로 바뀝니다.
- 변환 매개변수 입력창이 스케치 대화상자 상단에 추가됩니다.
- 선택적으로 첫 번째 변환방향을 따라 복사본 수를 입력합니다.
- 숫자를 입력합니다.
- 숫자를 늘리려면 U 키를 누르세요.
- 숫자를 줄이려면 J 키를 누르세요.
- 선택적으로 두 번째 방향을 따라 행 수를 변경합니다.
- 숫자를 입력합니다.
- 숫자를 늘리려면 R 키를 누르세요.
- 숫자를 줄이려면 F 키를 누르세요.
- 필요에 따라 작업에서 치수 구속조건을 제외하려면 동일 구속 적용 확인란을 선택합니다. 대신 원본 개체와 복사본 사이에
동일 구속을 적용합니다.
- 첫 번째 벡터의 시작점을 선택합니다. 또는 Pos-OVP의 경우: X 및 Y 좌표를 입력합니다. 이 벡터는 복사본 간의 오프셋을 정의합니다.
- 첫 번째 벡터의 끝점을 선택합니다. 또는 Dim-OVP의 경우: 벡터의 길이 및 각도를 입력합니다. 각도는 스케치의 X축을 기준으로 합니다.
- 행이 두 개 이상인 경우: 두 번째 벡터의 끝점을 선택합니다. 또는 Dim-OVP의 경우: 벡터의 길이 및/또는 각도를 입력합니다. 각도는 스케치의 X축을 기준으로 합니다. 이 벡터는 행 사이의 오프셋을 정의합니다.
- 요소가 복사됩니다. Pos-OVP 또는 Dim-OVP 기반의 구속은 추가되지 않습니다.
- General: New Sketch, Edit Sketch, Attach Sketch, Reorient Sketch, Validate Sketch, Merge Sketches, Mirror Sketch, Leave Sketch, Align View to Sketch, Toggle Section View, Stop Operation, Grid, Snap, Rendering Order
- Geometries: Point, Polyline, Line, Arc From Center, Arc From 3 Points, Elliptical Arc, Hyperbolic Arc, Parabolic Arc, Circle From Center, Circle From 3 Points, Ellipse From Center, Ellipse From 3 Points, Rectangle, Centered Rectangle, Rounded Rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Polygon, Slot, Arc Slot, B-Spline, Periodic B-Spline, B-Spline From Knots, Periodic B-Spline From Knots, Toggle Construction Geometry
- Constraints:
- Dimensional Constraints: Dimension, Horizontal Dimension, Vertical Dimension, Distance Dimension, Radius/Diameter Dimension, Radius Dimension, Diameter Dimension, Angle Dimension, Lock Position
- Geometric Constraints: Coincident Constraint (Unified), Coincident Constraint, Point-On-Object Constraint, Horizontal/Vertical Constraint, Horizontal Constraint, Vertical Constraint, Parallel Constraint, Perpendicular Constraint, Tangent/Collinear Constraint, Equal Constraint, Symmetric Constraint, Block Constraint, Refraction Constraint
- Constraint Tools: Toggle Driving/Reference Constraints, Toggle Constraints
- Sketcher Tools: Fillet, Chamfer, Trim Edge, Split Edge, Extend Edge, External Projection, External Intersection, Carbon Copy, Select Origin, Select Horizontal Axis, Select Vertical Axis, Move/Array Transform, Rotate/Polar Transform, Scale, Offset, Mirror, Remove Axes Alignment, Delete All Geometry, Delete All Constraints, Copy Elements, Cut Elements, Paste Elements
- B-Spline Tools: Geometry to B-Spline, Increase B-Spline Degree, Decrease B-Spline Degree, Increase Knot Multiplicity, Decrease Knot Multiplicity, Insert Knot, Join Curves
- Visual Helpers: Select Under-Constrained Elements, Select Associated Constraints, Select Associated Geometry, Select Redundant Constraints, Select Conflicting Constraints, Toggle Circular Helper for Arcs, Toggle B-Spline Degree, Toggle B-Spline Control Polygon, Toggle B-Spline Curvature Comb, Toggle B-Spline Knot Multiplicity, Toggle B-Spline Control Point Weight, Toggle Internal Geometry, Switch Virtual Space
- Additional: Sketcher Dialog, Preferences, Sketcher scripting
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Material, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub