スケッチャー・寸法
Appearance
|
|
| Menu location |
|---|
| Sketch → Constraints → Dimension |
| Workbenches |
| Sketcher |
| Default shortcut |
| D |
| Introduced in version |
| 1.0 |
| See also |
| None |
Description
The Sketcher Dimension tool is the context-sensitive constraint tool of the Sketcher Workbench. Based on the current selection, it offers appropriate dimensional constraints, but also geometric constraints.
Usage
See also: Drawing aids.
- Optionally select one or more elements (edges or points). B-spline edges are currently not supported.
- There are several ways to invoke the tool:
- If the Dimensioning constraints preference is set to
BothorSingle tool(default): press theDimension button.
- Select the Sketch → Constraints →
Dimension option from the menu.
- Right-click in the 3D View and select the Dimension →
Dimension option from the context menu.
- If there is a selection: Right-click in the 3D View and select the
Dimension option from the context menu.
- Use the keyboard shortcut: D.
- If the Dimensioning constraints preference is set to
- The cursor changes to a cross with the tool icon.
- If you have not yet selected an element: select one.
- Depending on the selected element(s) a constraint is proposed.
- Optionally select an additional element.
- Optionally deselect an element by clicking it again.
- The proposed constraint is updated after every selection change.
- Optionally press the M key one or more times to cycle through other available constraints, if any.
- If a geometric constraint is proposed, selected elements may change giving a preview of the result.
- Do one of the following:
- Click in an empty area in the 3D View to confirm:
- If a dimensional constraint is created the clicked point determines its location. For a linear dimension the clicked point also determines its type:
horizontal dimension,
vertical dimension or
distance dimension.
- If a driving dimensional constraint is created, depending on the preferences, a dialog opens to edit its value.
- A constraint is added.
- This tool always runs in continue mode: optionally keep creating constraints.
- If a dimensional constraint is created the clicked point determines its location. For a linear dimension the clicked point also determines its type:
- To finish, right-click or press Esc, or start another geometry or constraint creation tool.
- Click in an empty area in the 3D View to confirm:
Notes
Horizontal dimensions and
vertical dimensions have a distinct behavior compared to
distance dimensions. The first two dimension types have signed dimension values, they also constrain the relative positions of the measured points. These will only switch places if the sign of the dimension value is changed. For example, if the value of a horizontal dimension remains positive, or negative, the left point will always remain the left point. This is not the case for the distance dimension type, which has an unsigned value. When using this tool to apply a dimensional constraint to points with the same X- or Y-coordinate, you need to take care when picking the point to position it. You can verify which dimension type will be created by checking the last item in the Constraints section of the Sketcher Dialog, this will dynamically update as you move the mouse.
- 全般: スケッチを作成、スケッチを編集、スケッチをアタッチ、スケッチの方向を変更、スケッチを検証、スケッチをマージ、スケッチを鏡像化、スケッチの編集を終了、スケッチを表示、セクション表示、グリッドの表示を切り替え、スナップの切り替え、レンダリング順を設定、操作を停止
- スケッチャージオメトリー: 点を作成、ポリライン(折れ線)を作成、線分を作成、中心点から円弧を作成、3点指定円弧を作成、楕円弧を作成、双曲線の円弧を作成、放物線の円弧を作成、中心を指定して円を作成、3点で円を作成、中心点を指定して楕円を作成、3点を指定して楕円を作成、長方形を作成、中心配置長方形、角丸長方形、正三角形, 正方形、正五角形、正六角形、正七角形、正八角形、正多角形、長円形を作成、円弧状の長円形を作成、制御点によるBスプライン, 制御点によるBスプライン、制御点によるBスプライン、ノットによる周期的Bスプライン、構築ジオメトリの切り替え
- スケッチャー拘束:
- 寸法拘束: 寸法、水平距離拘束、垂直距離拘束、距離拘束、半径/直径を自動拘束、半径拘束、直径拘束、角度を拘束、ロック拘束
- 幾何拘束: 一致拘束(統合)、一致拘束、点がオブジェクト上にある拘束、水平/垂直拘束、水平拘束、垂直拘束、 並行拘束, 直角拘束、正接拘束または共線拘束、等値拘束、対称拘束、固定拘束
- その他の拘束: 屈折率拘束(スネルの法則)
- 拘束ツール: 駆動拘束/参照拘束の切り替え、駆動拘束/参照拘束の切り替え
- スケッチャーツール フレットを作成、面取りを作成、エッジをトリム、エッジを分割、エッジを延長、外部ジオメトリを作成、カーボンコピーを作成、原点を選択, 水平軸を選択、垂直軸を選択、配列変換, 軸周変換、スケール変換、オフセット、対称、軸方向の拘束を解除、すべてのジオメトリーを削除, すべての拘束を削除
- スケッチャーBスプラインツール: ジオメトリをB-スプラインに変換、Bスプラインの次数を増やす、Bスプラインの次数を減らす、ノット多重度を増やす, ノット多重度を減らす、ノットを挿入、曲線を結合
- スケッチャー表示ツール: 未拘束の自由度を選択、関連する拘束を選択、関連する要素を選択、冗長な拘束を選択、競合する拘束を選択、円弧の補助円を表示/非表示、Bスプライン次数の表示/非表示, Bスプライン制御ポリゴンの表示/非表示、Bスプライン曲率コームの表示/非表示、Bスプラインノット多重度の表示/非表示、Bスプライン制御点重みの表示/非表示、内部ジオメトリの表示/非表示、仮想スペース切り替え
- はじめてみよう
- インストール: ダウンロード、Windowsへのインストール、Linuxへのインストール、Macへのインストール、付加機能のインストール、Dockerでのコンパイル、AppImage、Ubuntu Snap
- 基本: FreeCADについて、ユーザー・インタフェース、Mマウス・ナビゲーション、オブジェクトの選択方法、オブジェクトの名前、設定、ワークベンチ、FreeCADファイルの構造、プロパティ、FreeCADへの貢献、寄付
- ヘルプ: チュートリアル、チュートリアル動画
- ワークベンチ: 共通ツール、アセンブリー、BIM、CAM、ドラフト、FEM、インスペクション、マテリアル、メッシュ、OpenSCAD、 パート、パートデザイン、ポイント、リバースエンジニアリング、ロボット、スケッチャー、スプレッドシート、サーフェス、テックドロー、テストフレームワーク
- 情報ハブ: ユーザー向けハブ、パワーユーザー向けハブ、開発者向けハブ