Skicář Zaoblení

From FreeCAD Documentation
This page is a translated version of the page Sketcher CreateFillet and the translation is 17% complete.
Outdated translations are marked like this.

Skicář Zaoblení

Umístění Menu
Náčrt → Skicář Konstrukce → Vytvořit zaoblení
Pracovní stoly
Skicář
Výchozí zástupce
F
Představen ve verzi
-
Viz také
Nikdo

Popis

Tento nástroj vytvoří zaoblení mezi dvěma přímkami, které se spojí v bodě. Aktivuje se tento nástroj a potom se vyberou obě přímky nebo se klikne na rohový bod.

introduced in version 0.22: If two straight edges connected by a Coincident constraint are filleted or chamfered, the corner point can optionally be preserved by adding a Point object that has a Point on object constraint with both edges. Constraints connected to the corner point are then transferred to the new point object.

Použití

See also: Drawing aids.

  • Vyberte vrchol, kde se dotýkají dvě přímky nebo klikněte na dvě dotýkající se přímky. Vzdálenost mezi kliknutím a vrcholem určuje poloměr zaoblení.
  • Stisknutí klávesy Esc nebo kliknutí pravým tlačítkem myši přeruší nebo ukončí funkci nástroje.

Notes

  • The construction geometry arc of a chamfer is not visible outside the sketch. It cannot be deleted without breaking the geometry of the chamfer.
  • Some (conic) curves may need to be trimmed before they can be filleted.
  • The fillet radius depends on the selection method. If a Coincident constraint connecting two straight edges is selected, the fillet radius is derived from the length of the shortest edge. If two edges are selected the radius is the distance from the first clicked point to the (extended) intersection of the edges.