Arch: Bara de armătură îndoită în U
Appearance
Outdated translations are marked like this.
|
| Menu location |
|---|
| Arch → Rebar tools |
| Workbenches |
| Arch |
| Default shortcut |
| None |
| See also |
| LShape Rebar |
| This command is part of the Reinforcement AddOn, that you can install via menu Tools → Addons Manager |
Descriere
Instrumentul
UShape Rebar permite utilizatorului să creeze o armătură UShape reinforcing în elementul structural.
This tool is part of the Reinforcement Workbench, an external workbench that can be installed with the Addon Manager.
Cum se folosește
- Creați un element structure
- Selectați orice fațetă a structurii
- Apoi selectați butonul
UShape Rebar dintre instrumentele penru armături/rebar tools - Un task panel contextual va apărea în stânga ecranului după cum se vede în ecranul de mai jos

- Selectați orientarea dorită
- Dați datele inițiale cum ar fi capacul frontal, capacul lateral din dreapta, capacul din partea stângă, capacul inferior, capacul superior, factorul de rotunjire și diametrul barei
- Selectați modul de distribuție sau mărimea spațiului
- Dacă spațierea este selectată, un utilizator poate de asemenea să opteze pentru custom spacing
- Alegeți fața selectată care este utilizată pentru a verifica sau schimba fațeta pentru distribuția barei
- Click pe tasta OK sau Apply pentru a genera armături rebars
- Click pe tasta Cancel pentru a ieși din task panel
Task panel for the tool
Proprietăți
- DateOrientation: Acesta decide orientarea armăturii (de ex. jos, sus, drepta și stânga).
- DateFront Cover: Distanța dintre armături și fațetele selectate.
- DateRight Cover: Distanța între capătul dintre capătul dreapta al armăturii și fațeta dreapta a structurii.
- DateLeft Cover: Distanța dintre capătul din stânga al armăturii și fațeta stângă a structurii
- DateBottom Cover: Distanța dintre armătură și fațeta de jos a structurii.
- DateTop Cover: Distanța dintre armătură și fața superioară a structurii.
- DateRounding: O valoare de rotunjire care trebuie aplicată colțurilor barelor, exprimată în raport cu diametrul acestora.
- DateAmount: Cantitatea de armătură
- DateSpacing: Distnța dintre acele fiecărei bare.
Scripting
Scrip-Programare
Instrumentul
UShape Rebar poate fi utilizat în macros și din consola Python prin utilizarea următoarea funcție:
Rebar = makeUShapeRebar(f_cover, b_cover, r_cover, l_cover,
diameter, t_cover, rounding, amount_spacing_check, amount_spacing_value, orientation="Bottom",
structure=None, facename=None)
- Armătura UShape Rebar are patru orientări diferite:
- Bottom
- Top
- Right
- Left
- Adaugă un obiect tip UShape reinforcing bar șa obiectul structural dat.
- Dacă nu este dată nici o structură și nic o Facename, ea va avea ca intrare fațeta selectată de utilizator.
- Returnează noul obiect Rebar
Exemplu: Crearea unei armături tip bară în U.
import FreeCAD, Arch, UShapeRebar
Structure = Arch.makeStructure(length=1000, width=1000, height=400)
Structure.ViewObject.Transparency = 80
FreeCAD.ActiveDocument.recompute()
Rebar = UShapeRebar.makeUShapeRebar(50, 20, 20, 20,
8, 50, 4, True, 6, "Bottom", Structure, "Face4")
Rebar.ViewObject.ShapeColor = (0.9, 0.0, 0.0)
Rebar2 = UShapeRebar.makeUShapeRebar(50, 50, 20, 20,
8, 50, 4, True, 6, "Bottom", Structure, "Face6")
Rebar2.ViewObject.ShapeColor = (0.0, 0.0, 0.9)
Edition of the rebar
Schimbarea proprietăților barei în U.
editUShapeRebar(Rebar, f_cover, b_cover, r_cover, l_cover,
diameter, t_cover, rounding, amount_spacing_check, amount_spacing_value, orientation,
structure=None, facename=None)
Rebaris a previously createdUShapeRebarobject.- The other parameters are the same as required by the
makeUShapeRebar()function. structureandfacenamemay be omitted so that the rebar stays in the original structure.
import UShapeRebar
UShapeRebar.editUShapeRebar(Rebar, 50, 50, 20, 20,
16, 20, 5, True, 5, "Top")
UShapeRebar.editUShapeRebar(Rebar2, 70, 50, 20, 20,
16, 70, 5, True, 5, "Top")
- 2D drafting: Sketch, Line, Polyline, Circle, Arc, Arc From 3 Points, Fillet, Ellipse, Polygon, Rectangle, B-Spline, Bézier Curve, Cubic Bézier Curve, Point
- 3D/BIM: Project, Site, Building, Level, Space, Wall, Curtain Wall, Column, Beam, Slab, Door, Window, Pipe, Connector, Stairs, Roof, Panel, Frame, Fence, Truss, Equipment
- Reinforcement Tools: Custom Rebar, Straight Rebar, U-Shape Rebar, L-Shape Rebar, Stirrup, Bent-Shape Rebar, Helical Rebar, Column Reinforcement, Beam Reinforcement, Slab Reinforcement, Footing Reinforcement
- Generic 3D Tools: Profile, Box, Shape Builder, Facebinder, Objects Library, Component, External Reference
- Annotation: Text, Shape From Text, Aligned Dimension, Horizontal Dimension, Vertical Dimension, Leader, Label, Hatch, Axis, Axis System, Grid, Section Plane, New Page, New View
- Create 2D Views: 2D Drawing, Section View, Section Cut
- Snapping: Snap Lock, Snap Endpoint, Snap Midpoint, Snap Center, Snap Angle, Snap Intersection, Snap Perpendicular, Snap Extension, Snap Parallel, Snap Special, Snap Near, Snap Ortho, Snap Grid, Snap Working Plane, Snap Dimensions, Toggle Grid, Working Plane Front, Working Plane Top, Working Plane Side, Working Plane
- Modify: Move, Copy, Rotate, Clone, Create Simple Copy, Create Compound, Offset, 2D Offset, Trimex, Join, Split, Scale, Stretch, Draft to Sketch, Upgrade, Downgrade, Add Component, Remove Component, Array, Path Array, Polar Array, Point Array, Cut With Plane, Mirror, Extrude, Difference, Union, Intersection
- Manage: BIM Setup, Views Manager, Setup Project, Manage Doors and Windows, Manage IFC Elements, Manage IFC Quantities, Manage IFC Properties, Manage Classification, Manage Layers, Material, Schedule, Preflight Checks, Annotation Styles
- Utils: Toggle Bottom Panels, Move to Trash, Working Plane View, Select Group, Set Slope, Working Plane Proxy, Add to Construction Group, Split Mesh, Mesh to Shape, Select Non-Manifold Meshes, Remove Shape From BIM, Close Holes, Merge Walls, Check, Toggle IFC B-Rep Flag, Toggle Subcomponents, Survey, IFC Diff, IFC Explorer, New IFC Spreadsheet, Image Plane, Unclone, Rewire, Glue, Re-Extrude
- Panel Tools: Panel, Panel Cut, Panel Sheet, Nest
- Structure Tools: Structure, Structural System, Multiple Structures
- IFC Tools: IFC Diff, IFC Expand, Create IFC Project, IfcOpenShell Update
- Nudge: Nudge Switch, Nudge Up, Nudge Down, Nudge Left, Nudge Right, Nudge Rotate Left, Nudge Rotate Right, Nudge Extend, Nudge Shrink
- Additional: Preferences, Fine tuning, Import Export Preferences, IFC, DAE, OBJ, JSON, 3DS, SHP
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Material, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub