Arch: Armatura diritta
|
|
| Posizione nel menu |
|---|
| Arch → Strumenti di armatura → Armatura diritta 3D/BIM → Reinforcement tools → Armatura diritta |
| Ambiente |
| Arch, BIM |
| Avvio veloce |
| Nessuno |
| Introdotto nella versione |
| 0.17 |
| Vedere anche |
| Reinforcement, Armatura, Distinta dei ferri |
Descrizione
Lo strumento Armatura diritta consente all'utente di creare un set di staffe d'armatura all'interno di un oggetto Struttura.
Questo comando fa parte dell'ambiente Reinforcement, un ambiente esterno che si può installare con Addon Manager, tramite il menu Strumenti → Addon manager → Reinforcement.
Due serie di barre di rinforzo diritte all'interno di una Struttura
Utilizzo
- Selezionare una qualsiasi faccia dell'oggetto
Struttura.
- Quindi selezionare
Armatura diritta dagli strumenti dell'armatura.
- Sul lato sinistro dello schermo appare un pannello come quello sottostante.
- Selezionare l'orientamento desiderato.
- Fornire i dati per 'Copriferro anteriore', 'Copriferro lato destro', 'Copriferro lato sinistro', 'Copriferro inferiore' e 'Diametro' per l'armatura.
- Seleziona la modalità di distribuzione tra 'Quantità' o 'Passo'.
- Se è selezionato Passo, l'utente può anche optare per Passo personalizzato.
- Usa lato selezionato viene utilizzato per verificare o modificare la faccia per la distribuzione dell'armatura.
- Cliccare OK o Applica per generare l'armatura.
- Cliccare Annulla per uscire dal pannello.
Pannello per lo strumento Armatura diritta di Arch
Proprietà
- DatiOrientamento: Decide l'orientamento dell'armatura (es. in basso, in alto, a destra e a sinistra).
- DatiCopriferro anteriore: La distanza tra l'armatura e la faccia selezionata.
- DatiCopriferro lato destro: La distanza tra l'estremità destra dell'armatura e la faccia destra della struttura.
- DatiCopriferro lato sinistro: La distanza tra l'estremità sinistra dell'armatura e la faccia sinistra della struttura.
- DatiCopriferro in direzione: Queste proprietà consentono all'utente di specificare il copriferro superiore o inferiore.
- DatiCopriferro inferiore : La distanza tra l'armatura e la faccia inferiore della struttura.
- DatiCopriferro superiore: La distanza tra l'armatura e la faccia superiore della struttura.
- DatiQuantità: La quantità di armature.
- DatiPasso: La distanza tra gli assi di ciascuna barra.
Scripting
Vedere anche: API Arch, API Reinforcement e Script di base per FreeCAD.
Lo strumento Armatura diritta può essere usato nelle macro e dalla console Python utilizzando la seguente funzione:
Rebar = makeStraightRebar(f_cover, coverAlong, rt_cover, lb_cover,
diameter, amount_spacing_check, amount_spacing_value, orientation="Horizontal",
structure=None, facename=None)
- Crea un oggetto
Rebardallastructuredata, che è una Struttura, e da unafacename, che è una faccia di quella struttura.- Se non è data nessuna
structuree neppure unafacename, prende come riferimento la faccia selezionata dall'utente.
- Se non è data nessuna
f_cover,coverAlong,rt_cover, elb_coversono le distanze di offset interne per gli elementi dell'armatura rispetto alle facce della struttura.f_coverè l'offset del copriferro frontale.coverAlongè una tupla(position, value)che definisce il valore di offset in una posizione (top, bottom, left, right) che dipende daorientation.rt_coverè l'offset del copriferro destro o superiore, a seconda del valore dicoverAlongeorientation.lb_coverè l'offset del copriferro sinistro o inferiore, a seconda del valore dicoverAlongeorientation.
diameterè il diametro delle barre di rinforzo all'interno della struttura.- Se
amount_spacing_checkèTruecrea tante barre di rinforzo quante sono definite daamount_spacing_value; se èFalsecrea le barre di rinforzo separate dal valore numerico indicato inamount_spacing_value. amount_spacing_valuespecifica il numero di barre di rinforzo o il valore della separazione tra di esse, secondo come sono indicate inamount_spacing_check.orientationspecifica l'orientamento della barra d'armatura; può essere"Horizontal"o"Vertical".
A seconda dell'orientamento della barra di armatura, la funzione può essere chiamata in due modi generali impostando coverAlong in modo appropriato.
La barra è orizzontale
Rebar = makeStraightRebar(f_cover, ("Top Side", value), right_cover, left_cover, ...)
Rebar = makeStraightRebar(f_cover, ("Bottom Side", value), right_cover, left_cover, ...)
coverAlongè una tupla con unvaluedi offset"Top Side"o"Bottom Side".- In questo caso
rt_coversi riferisce all'offsetright_cover, elb_coversi riferisce all'offsetleft_cover.
La barra è verticale
Rebar = makeStraightRebar(f_cover, ("Left Side", value), top_cover, bottom_cover, ...)
Rebar = makeStraightRebar(f_cover, ("Right Side", value), top_cover, bottom_cover, ...)
coverAlongè una tupla con unvaluedi offset"Left Side"o"Right Side".- In questo caso
rt_coversi riferisce all'offsettop_cover, elb_coversi riferisce all'offsetbottom_cover.
Esempio orizzontale
import Arch, Draft, StraightRebar
Structure = Arch.makeStructure(length=1000, width=1000, height=400)
Structure.ViewObject.Transparency = 80
FreeCAD.ActiveDocument.recompute()
Rebar = StraightRebar.makeStraightRebar(50, ("Bottom Side", 20), 100, 100,
12, True, 5, "Horizontal", Structure, "Face4")
Rebar.ViewObject.ShapeColor = (0.9, 0.0, 0.0)
Rebar2 = StraightRebar.makeStraightRebar(50, ("Bottom Side", 50), 100, 100,
12, True, 5, "Horizontal", Structure, "Face6")
Rebar2.ViewObject.ShapeColor = (0.0, 0.0, 0.9)
Esempio vericale
import Arch, Draft, StraightRebar
Structure2 = Arch.makeStructure(length=1000, width=1000, height=400)
Structure2.ViewObject.Transparency = 80
Draft.move(Structure2, FreeCAD.Vector(1500, 0, 0))
FreeCAD.ActiveDocument.recompute()
Rebar3 = StraightRebar.makeStraightRebar(50, ("Left Side", 20), 100, 100,
12, True, 5, "Vertical", Structure2, "Face4")
Rebar3.ViewObject.ShapeColor = (0.9, 0.5, 0.0)
Rebar4 = StraightRebar.makeStraightRebar(50, ("Left Side", 50), 100, 100,
12, True, 5, "Vertical", Structure2, "Face6")
Rebar4.ViewObject.ShapeColor = (0.0, 0.5, 0.5)
Edition of rebar
Modifica delle barre
È possibile modificare le proprietà dell'armatura con la seguente funzione:
editStraightRebar(Rebar, f_cover, coverAlong, rt_cover, lb_cover,
diameter, amount_spacing_check, amount_spacing_value, orientation,
structure=None, facename=None)
Rebarè l'oggettoStraightRebarcreato in precedenza.- Gli altri parametri sono gli stessi richiesti dalla funzione
makeStraightRebar(). structureefacenamepossono essere omesse in modo che l'armatura rimanga nella struttura originale.
Esempio:
import StraightRebar
StraightRebar.editStraightRebar(Rebar, 50, ("Top Side", 20), 100, 100,
24, True, 7, "Horizontal")
StraightRebar.editStraightRebar(Rebar2, 50, ("Top Side", 50), 100, 100,
24, True, 7, "Horizontal")
StraightRebar.editStraightRebar(Rebar3, 50, ("Right Side", 20), 100, 100,
24, True, 7, "Vertical")
StraightRebar.editStraightRebar(Rebar4, 50, ("Right Side", 50), 100, 100,
24, True, 7, "Vertical")
- 2D Drafting: Sketch, Line, Polyline, Rectangle, Arc, Arc From 3 Points, Circle, Ellipse, Polygon, B-Spline, Bézier Curve, Cubic Bézier Curve, Point, Fillet
- 3D/BIM: Site, Building, Level, Space, Wall, Curtain Wall, Column, Beam, Slab, Door, Window, Covering, Pipe, Connector, Stairs, Roof, Panel, Frame, Fence, Truss, Equipment
- Reinforcement Tools: Custom Rebar, Straight Rebar, U-Shape Rebar, L-Shape Rebar, Stirrup, Bent-Shape Rebar, Helical Rebar, Column Reinforcement, Beam Reinforcement, Slab Reinforcement, Footing Reinforcement
- Generic 3D Tools: Profile, Box, Shape Builder, Facebinder, Objects Library, Component, External Reference
- Annotation: Aligned Dimension, Horizontal Dimension, Vertical Dimension, Text, Leader, Label, Hatch, Axis, Axis System, Grid, Section Plane, 2D Drawing, Section View, Section Cut, New Page, New View
- Snapping: Snap Lock, Snap Endpoint, Snap Midpoint, Snap Center, Snap Angle, Snap Intersection, Snap Perpendicular, Snap Extension, Snap Parallel, Snap Special, Snap Near, Snap Ortho, Snap Grid, Snap Working Plane, Snap Dimensions, Toggle Grid, Working Plane Front, Working Plane Top, Working Plane Side, Working Plane
- Modify: Move, Rotate, Scale, Mirror, Clone, Make Link, Copy, Simple Copy, Compound, 2D Offset, Offset, Trimex, Join, Split, Stretch, Draft to Sketch, Upgrade, Downgrade, Add Component, Remove Component, Array, Path Array, Polar Array, Point Array, Cut With Plane, Extrude, Union, Difference, Intersection
- Manage: BIM Setup, Setup Project, Manage Doors and Windows, Manage IFC Elements, Manage IFC Quantities, Manage IFC Properties, Manage Classification, Manage Layers, Material, BIM Report, Schedule, Preflight Checks, Annotation Styles
- Utils: Move to Trash, Working Plane View, Select Group, Set Slope, Working Plane Proxy, Add to Construction Group, Split Mesh, Mesh to Shape, Select Non-Manifold Meshes, Remove Shape From BIM, Close Holes, Merge Walls, Check, Toggle IFC B-Rep Flag, Toggle Subcomponents, Survey, IFC Diff, IFC Explorer, New IFC Spreadsheet, Image Plane, Unclone, Rewire, Glue, Re-Extrude
- Panel Tools: Panel, Panel Cut, Panel Sheet, Nest
- Structure Tools: Structure, Structural System, Multiple Structures
- IFC Tools: IFC Project, IFC Diff, IFC Expand, Convert to IFC Project, IfcOpenShell Update
- Nudge: Nudge Switch, Nudge Up, Nudge Down, Nudge Left, Nudge Right, Nudge Rotate Left, Nudge Rotate Right, Nudge Extend, Nudge Shrink
- Additional: Preferences, Fine tuning, Import Export Preferences, IFC, DAE, OBJ, JSON, 3DS, SHP
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Material, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub