路径工作台

From FreeCAD Documentation
(Redirected from Path Workbench/zh-cn)
This page is a translated version of the page CAM Workbench and the translation is 4% complete.
Outdated translations are marked like this.
CAM workbench icon

简介

路径工作台用于从 FreeCAD 3D模型中生成 数控机床 的机器指令。这些产品在数控机床 (如铣刀、车床、激光切割机或类似设备) 上生产真实世界的 3D 物体。通常,指令集是G 代码 的方言。

FreeCAD 路径工作台工作流程以以下方式创建机器指令:

  • 3D 模型是基本对象, 通常使用一个或多个 零件设计, 零件底图 工作台。
  • 作业 是在路径工作台中创建的。这包含了所有信息用于生成数控机床上处理作业的必要 G 代码: 有库存材料, 铣削有一个确定的 工具集, 它遵循某些命令控制速度和动作 (通常是 G 代码)。
  • 根据作业操作的要求选择工具。
  • 铣削路径的创建使用例如 轮廓袖珍 操作。这些 路径对象 使用内部 FreeCAD G 代码方言, 独立于数控机床。

General concepts

一般概念

路径工作台生成 G 代码,定义了在目标中铣削由 3D 模型表示的项目所需要的路径—在 路径作业操作 FreeCAD G 代码方言,然后通过选择合适的后处理器, 将其转换为目标数控控制器的相应方言。

G 代码是从路径作业中包含的指令和操作生成的。 作业工作流按将执行的顺序列出这些任务。通过添加路径操作、路径装饰、路径部分命令和路径修改—从路径菜单或 GUI 按钮。

The G-code is generated from directives and Operations contained in a Path Job. The Job Workflow lists these in the order they will be executed. The list is populated by adding Path Operations, Path Dressups, Path Supplemental Commands, and Path Modifications from the Path Menu, or GUI buttons.

路径工作台提供了一个工具管理器(库,工具表),和 G 代码检查,和模拟工具。它链接到后处理器,和允许导入和导出工作模板。

路径工作台有一个外部依赖:

  1. FreeCAD 3D 模型单位是在 Edit->Preference...->General->Units 选项卡的单位进行设置。后处理器配置定义了最终的 G 代码单位。
  2. 宏文件路径和几何公差是在Edit->Preferences...->Path->Job Preferences 选项卡中定义
  3. 颜色在 Edit->Preferences...->Path->Path colors 选项卡中设置
  4. 保存标记参数在 Edit->Preferences...->Path->Dressups 选项卡中设置
  5. 基本 3D 模型质量支持路径 WB 要求-通过检查几何。

Limitations

Some current limitations of which you should be aware are:

  • Most of the Path Tools are not true 3D tools but only 2.5D capable. This means that they take a fixed 2D shape and can cut it down to a given depth. However, there are two tools which produce true 3D paths: 3D Pocket and 3D Surface (which is still an experimental feature as of November 2020).
  • Most of Path workbench is designed for a simple, standard 3-axis (xyz) CNC mill/router, but lathe tools are under development in 0.19_pre.
  • Most operations in Path workbench will return paths based on a standard endmill tool/bit only, regardless of the tool/bit type assigned in a given tool controller with the exception of the Engrave and 3D Surface operations.
  • The operations within the Path workbench are not aware of clamping mechanisms in use to secure the model to your machine. Consequently, please review and simulate the paths you generate prior to sending the code to your machine. If necessary, model your clamping mechanisms in FreeCAD in order to better inspect the paths generated. Look for possible collisions with clamps or other obstacles along the paths.

Units

Unit handling in Path can be confusing. There are several points to understand:

  1. FreeCAD base units for length and time are 'mm' and 's' respectively. Velocity is thus 'mm/s'. This is what FreeCAD stores internally regardless of anything else
  2. The default unit schema uses the default units. If you're using the default schema and you enter a feed rate without a unit string, it will get entered as 'mm/s'
  3. Most CNC machines expect feed rate in the form of either 'mm/min' or 'in/min'. Most post-processors will automatically convert the unit when generating gcode.

Schemas:

  1. Changing schema in preferences changes default unit string for the input fields. If you're a Path user and prefer to design in metric, it's highly recommended that you use the "Metric Small Parts & CNC" schema. If you design in US units, either the Imperial Decimal and Building US will work
  2. Changing your preferred unit schema will have no effect on output but will help avoid input errors

Output:

  1. Generating the correct unit in output is the responsibility of the post-processor and is done only at that time
  2. Machine output unit is completely unrelated to your selected unit schema
  3. Post-processors produce either metric (G21) output, Imperial (G20) output or are configurable.
  4. Configurable post-processors default to metric (G21)
  5. If you want your configurable post-processor to output imperial gcode (G20), Set the correct argument in your job output configation (ie --inches for linuxcnc). This can be stored in a job template and set as your default template to make it automatic for all future jobs

Path Inspection:

  1. If you use the Path Inspect tool to look at g-code, you will see it in 'mm/s' because it is not being post-processed

Heights and depths

路径命令

Visual reference for Depth properties (settings)

Commands

Some commands are experimental and not available by default. To enable them see CAM experimental.

Project Commands

  • Job: 创建一个新的 CNC 作业

Tool Commands

Basic Operations

  • Profile: Creates a profile operation of the entire model, or from one or more selected faces or edges.
  • Pocket Shape: Creates a pocketing operation from one or more selected pocket(s).
  • Face: Creates a surfacing path.
  • Helix: Creates a helical path.
  • Adaptive: Creates an adaptive clearing and profiling operation.
  • Slot: Creates a slotting operation from selected features or custom points. Experimental.
  • Engrave: Creates an engraving path.
  • Deburr: Creates a deburr path.

路径装饰

3D Operations

Path Dressup

  • Boundary: Adds a boundary dressup modification to a selected path.
  • DragKnife: Adds a dragknife dressup modification to a selected path.
  • LeadInOut: Adds a lead-in and/or lead-out point to a selected path.
  • RampEntry: Adds ramp entry dressup modification to a selected path.
  • Tag: Adds a holding tag dressup modification to a selected path.

部分命令

  • Probe: Creates a Probing Grid from a job stock.

路径修改

Specialty Operations

Miscellaneous

ToolBit architecture

Manage tools, bits, and the Tool Library. Based on the ToolBit architecture.

Other

路径工作台与其它 CAM 软件包共享很多概念但是它有自己的特性。如果有什么不对劲的地方, 这可能是一个很好的开始。

Preferences

脚本

Tutorials

Videos

Roadmap